SUMMARY: Very nice mobile solution for SATA drives.

The good guys at Vantec were nice enough to send a sample of their EZ-SWAP removable hard drive rack. This is a hot-swap mobile solution for those who wish to transport hard drives between locations, or perhaps those who routinely change hard drives for different OSs or enhanced security (Worried about viruses? Dedicate one drive to the internet only and swap out one for a "local only" drive).

Key features include:

• Compatible With 3.5" SATA Hard Drives (HDD)
• Hot-Swap HDDs - no need to turn the PC off or open it
• Aluminum case w/ additional cooling, some plastic parts
• Blue LCD that displays HUTR (HD Usage Time Record), Case temperature (C or F, user settable with audio alarm), HD Designation (slave or master), HD Access and Fan Status (LCD Settings)
• Power/HD access LEDs
• Anti-Dust Hard Drive Casing
• Three-Step Key Lock - HD on and locked, HD powered off and locked, HD powered off and unlocked.
• 40 mm rear cooling fan
• Size: 148 x 42 x 236 mm, 117 x 35 216 mm (Cartridge only)
• Weight: 750 grams full kit, 420 grams cartridge only

Note that the HUTR only records when the drive is accessed, not the total time the hard drive is powered up; I should also mention that the key is "universal"

Anyone who has one can unlock any drive.

The front shows the LCD

buttons to set temperature in degrees C or F, to set the temperature at which the alarm sounds (very shrill!) and to toggle the display functions.

The actuating lever is the silver locking arm to the right; rotating the lever out

allows the user to pull the case with the HD inside out of the sleeve. There is a plastic dust flap which swings down to keep dust out and look neat.

The back of the sleeve

shows the SATA cable connector, power plug and pins for the access cable connector. Inside the sleeve

shows the PCB with the connector for the case, the cooling fan to the right.