Features


Overclockers Forum

Shopping Search



Top Products


Motherboards

Intel

Abit

Gigabyte

Asus

EPoX

Iwill

MSI

Shuttle

Tyan

Soyo


Processors

AMD

Intel

Compaq


Cases

Antec

ATX

Enlight


Graphic Cards

Leadtek

ATI

Creative Labs

Hercules

MSI

VisionTek

nVidia


Memory

SDRAM

RDRAM

DDRAM

DDR


Sound Cards

Creative Labs

Jaton

SIIG

SB Live

Guillemot


Hard Drives

Fujitsu

IBM

Maxtor

Quantum


Networking

Linksys Lan Cards

Ethernet Cards

FDDI Cards

Networking Kits


Misc.

Monitors

CD Roms/Burners

Printers

Scanners

Software

REVIEWS & TIPS
Over 1000 Topics

ACCESSORIES
ADAPTERS
BEGINNER GUIDES
BENCHMARKING
BIOS
BUYING ADVICE
BX COOLER
CASE COOLING
CASE REVIEWS
CONTESTS
CONTROLLERS
CPU REVIEWS AND TIPS
HARD DRIVES
HEATSINK REVWS AND TIPS
HUMAN INTEREST
MEMORY MISCELLANEOUS
MOTHERBOARD REVIEWS
OVERCLOCKING EXPERIENCES AND TIPS
PELTIERS
PROBLEM PRODUCTS
REPAIRS
SYSTEM COOLERS
SYSTEM REVIEWS
THERMAL GREASE
UTILITIES
VENDOR REVIEWS
VIDEO CARD COOLING AND PERFORMANCE
VIDEO CARD REVIEWS
WATER COOLING


Please read EMAIL FAQs first: Comments, suggestions, and questions to Joe Citarella, Skip MacWilliam, or Ed Stroligo

"Silverprop Cyclone NexusLX"
Joe Citarella - 1/29/04


SUMMARY: Very good choice for chipset cooling with moderate power waterpumps.

LX

Silverprop was nice enough to send a Cyclone NexusLX waterblock to test.

The NexusLX features

  • ½” integrated hose fittings with only one seal between the top & base
  • Channelled base
  • Type II, Class 2 Anodization for corrosion resistance

You will notice below that the NexusLX's pressure drop is low+; this is due to its interior design:

Inside

Pic courtesy of Silverprop.

No such thing as a free lunch - increasing turbulence and channelling waterflow will require some "effort", and it shows up in pressure drop readings (not good or bad - just something to recognize).

The Cyclone Nexus LX is compatible with most chipsets (center hole distance 59mm/2.32") and on Intel® 865/875 motherboards (center loop distance 77.75mm/3.06") via an optional 865/875 clip.

The base

Base

appears well finished, although performance could be enhanced a bit by very well done hand lapping.

THE TEST

The Silverprop NexusLX was tested using the CPU Die Simulator and Waterblock Test Rig. Even though this is a chipset waterblock, testing it as a CPU waterblock should be rigorous enough for any application.

WATERBLOCK TEST RESULTS

Test Conditions: Inlet Water Temp: 28.5 C; Mounting force: 15 pounds; Heat Load: 70 Watts.

Plot

Waterblock
C/W
Pressure Drop - psi
Pressure Drop - inches H2O
Silverprop NexusLX
0.16
0.49
13.6

NOTE: These results are NOT comparable to tests done by others.
Unrounded data: 0.161 C/W with 0.0017 std dev.

Test Results indicate that the NexusLX's pressure drop (or head loss) across the waterblock is low+; flow resistance such as this means that Silverprop's NexusLX NexusLXs should function OK without using a very large waterpump, although anything less than 300 gph might compromise results, depending upon how restrictive other components are in system.

As with many waterblocks, I found that reducing flow to 0.5 gpm resulted in more of a performance decrease (about 1ºC) than the gain by increasing flow to 1.5 gpm (about 0.7ºC).

For a comparison of the NexusLX's performance to other waterblocks tested to date, see Overclockers.com Waterblock Test Results.

CONCLUSIONS

Silverprop's NexusLX Chipset Waterblock is a good choice for chipset cooling. Flow resistance is not unduly high, and the NexusLX will perform very well with moderate power waterpumps (300 gph). Users including a chipset waterblock should recognize that placing waterblocks in series will increase pressure drop.

Thanks again to Silverprop for sending this our way.

Email Joe


<< back to home