View Full Version : Intel CPUs
- dothan 479P and 478P
- 3.0E skt478 OC'd to 4Ghz on air!!!
- 660 O'C Advice needed
- explanation? difference between the 3cored xbox cpu and pc cpu's
- Temps on 2.8 Prescott
- Is my 3.2e Dying??
- Dual temperature read-out for Pentium 820???
- Pentium 4 Question
- No POST on XP Restart???
- Broken Northwood CPU pin, need help!
- Can someone post a pic from an AS8 w/ Vdroop Mod applied?
- I need a little help overclocking here
- Its that time... upgrade
- Proprietary Intel CPU???
- 550 vs. 820 D
- P4 northwood OC Question
- Quick Quesiton about Dothan
- Undervolting CPU for cooler temps!
- whats too high for load temps on a P4
- 630 + ASUS P5LD2 = Any good?
- 2.66ghz p4 northwood running at 3.5ghz on air
- New rig
- intel p4 overclock- 2700 mhz mark
- Temp Question.. 3.0E
- i865PE Supports Dual Core CPU
- High Temps with Pentium 630...
- So I'm ordering water, guesses?
- P4 2.4 ghz temps
- changing my BIOS...?
- Overclocking 630
- Celeron D thermal throttling?
- Chip of Choice?
- Overclocking the P4 Celeron 2.2
- should i or should i not?
- Dumb PD question...
- Slowly but Surely
- What do oyu think my max OC will be with this Pentuim M?
- Help Choosing a new CPU
- Celeron M in my old mobo?
- 478 Motherboard
- 1.4875v high for p4 6xx series?
- YONAH benchmarks @ Anandtech!
- Yonah preview
- New Intel 955XE oc Testing
- OS Independent Benchmarking Tool?
- Upgrading My Pentium 4
- Running out of parts to replace... any ideas?
- So yes, been awhile
- Northwood Chip woes.
- <<Need help for building overclocking system.>>
- Yonah impression and realistic view
- Wohoo First Rig [56K BEWARE!]
- Benchmarks for Pentium-M and Celeron-M?
- Worth an upgrade?
- Suggested (Ratio/Timings/Volts) for DDR400 with FSB at 267
- P4 lga775 prescott 521j 2.8ghz overclock
- Best Dual Core For Overclocking
- Prescott Temperatures
- 3.2 bottlenecking?
- No Post
- buy a 478 3.4 Extreme Ed. or stick w/ my 3.4 pressie + consider phase change?
- Time to upgrade?- SuperPI: 59sec
- Ok so, progress...
- Pentium 3 help needed
- how well do you guys think this will oc?
- new info on intels future.... interesting read...
- Is this any good/worth it....?
- ?!? Confused ?!?
- solid CPU for HTPC
- First Overclock....wow this is nice
- Pressler - When? Any day now?
- Stuck at 50 degs
- does where its manufactured make a differnce in dual core overclock?
- Dang, talk about core name jumble...
- dual core? =/
- Processor Upgrade Celeron to Pentium
- HT reducing single thread performance
- P4 Prescot 3.0Ghz and Machspeed PM9MS troubles!!!
- Please help selecting CPU, etc.
- P4 630 experience
- Safe Vcore (P4 2.6ghz)
- Intel 519 Vcore
- Is this easily fixed?
- SuperPI time, no longer the same. (I haven't touched anything) Something is wrong.
- Please help me pick a S478 Celeron D
- 3.4GHz Northwood vs 3.8GHz Celeron D?
- More Cores? Can somebody explain this to me?
- 830 Vcore fluctuates
- Can i get more out of my CPU?
- Conroe launch date being pushed up?
- i stay out of the forums alittle and i get bombarded with names...HELP!!
- Not too bad for 3.0E s478....
- Is this a good Processor to overclock?
- Replacing Silicone
- 820 temps under load????
- Presler - How much heat?
- Disable Pat = More OC?
- Temp 3 in Speedfan shows 119 C ?!?!?!
- 830 Overclocks
- looking for a northwood
- Whow do I overclock a P4 630 3.0GHz
- 5Ghz Club
- Intel 820 or Amd 3800x2 for upgrade?
- 65nm Architecture
- P4 Help- 506 or 630
- Old P4, need to know a few things...
- Cpu Vs Ram Upgrade!!??
- Dual Yonah's
- dxdiag thinks I have two CPUs
- Hot?
- 2.4@3.6. finally a computer that i own that is 3.5GHZ+
- Will Presslers run on 945 chipsets????
- P4 520 Prescott 2.8 @ 3.5
- P4 650 Power question
- Whew that was close...
- Please help me to build a reliable server system
- I need more voltage for my Cely!!!
- Looking to buy a new CPU - P4 Socket 478
- New System help
- AMD superiority secret?
- Apply Arctic Silver 5 to d830?
- budget box
- Best Socket 478 chip
- most voltage for a 2.4A?
- Possible to pin mod a Celeron M?
- Anything I can do?
- lol a bit too mutch voltage
- Overclocking 400Mhz PIII ?
- Dell 1850 2xXeon(dual cores) 64bit nightmare
- What the hell is going on with my cpu?
- pD 840 Dual Core ? question
- What is the non OC temp on a d830?
- Celeron 2.2 overheating problems
- How much would you pay?
- Anyone else dual 32M Super pi? (for HT) comps
- Lost in the Sauce, help!
- Cpu temp
- Pressler XE 3.46 @ 4.26 @ 91C Stock Cooler!
- wanna take it higher
- Higher FSB Yonahs?
- If only once....
- Intel changes the way the Speed Bin, good for consumers?
- NW 'M0'-step Voltages...
- intel 640 multipliers
- yonah to premier in powerbook!
- Intel n00b needs help!
- Early Upgrades
- Temp on a intel 630
- Celeron D 341 2.93Ghz!!!
- New Rig, going to try Intel, wait for Cedar Mill?
- 2.0A...What is "A"?
- Intel Reschedules Launch of Conroe
- Egads! (P4519 Oc'ing)
- Max OC Voltage on a P4 Northwood
- Stuck on 5.04GHz. Need advice on vcore. I'm doing this right now.
- Time for some fun :)
- Finally, 955XE @ 5.1GHz
- How much voltage is safe?
- HELP!! My CPU has a LIMIT?????????
- What is the best BIOS for overclocking my 660 on P5WD2
- P4 1.6a / Asus P4S533 - stability issues @ 2.4ghz
- Used CPU woes
- Whats the current Hot Dual-Core Intel to get?
- CPU Christmas anti-miracle
- need some advice - Buying Pentium 4 / sk478
- Just Pin Modded my Celeron M
- Older P4 not performing well
- "Presler" 955 Extreme Edition
- Multiplier?
- Which CPU should I use for my server?
- is this stepping is good?
- Pentium M's and All That Laptop Jazz
- Weird things happening with my LGA775 Prescott
- Intel 6xx Series Throttling Temps?
- newbie...are these numbers okay?
- Got my 950 65nm
- Intel Is coming out with a New line of INtel badges.
- Need help, very very strange problem....?!
- 2.4 Northwood Questions
- New to Intel, CelD 346 oc problems
- Yay, celeron 2.0 at 2.82!
- P4 3.2Ghz running at 3.8GHz Prime95 stable, but I have a question
- One more 820
- 2.4C stepping, any good?
- cpu problem!?! help.
- LiL KIds comp
- Northwood Celeron M OCed to 4.16GHz
- Celeron-M 1.4@4.24 =%203 OC
- Hott!!
- Pentium n00b
- Lowering Multi = Bad?
- s478 upgrade help
- Sisoft Sandra Results Thread (Dual Core Intel's Only)
- 65nm intel release dates?
- My new rig - Dothan!
- how to tell diffrent p4s apart?
- 4ghz
- overclocking P4 630
- celeron m overclock?
- Problem overclocking 2.0a northwood
- sl6xk's - can you tell stepping through windows
- Thinking of getting a 531 and I have a few questions
- Upgrade
- P4 2.4b and beyond!
- Early Reviews 955 Extreme Edition
- How much voltage can I safely give a water cooled 640?
- Whats the best 775 cpu?
- Willamette voltage (how much is safe for everyday use?)
- Presler is coming (before Feb)
- cpu multiplier question
- Upgrade from a 2.4B/533 to a 2.8C/533
- Your Oldest living OCed CPU
- Celly D or Northwood?
- mobo that overclock great with 630 3.0ghz?
- What can I expect from an old PIII 733mhz that I want to OC for my Ubuntu system?
- Intel New Logo
- price drop coming?
- Overclocking 820D..
- 930 Presler on the way!!
- Yonah preview benchmarks
- Help: Pentium M 770 and Asus P4P800-E Deluxe?
- quick answer to intel cpu question please!!
- 9xx Reviewed, along with the TDP figures.
- Pentium 4 630 - 3 GHz - overclocking!?
- p4 2.0 northy ocing help
- Good Yonah release article..
- Presler 930 Results...
- motherboard recommendions for p4???
- OveerClocking Intel 775 Series with EasyTune 5!
- newbie question about presler and cedar mill
- Pentium D 840 1066FSB "Pad Mod"
- Official Presler/Cedar Mill Overclocking & Issues Thread
- Ready to OC my New Rig, advice needed!
- Dothan 1.4 need voltage raise to use 133mhz fsb?
- "Core Duo" overclocking
- P4 530j overclocking experimentation
- 3.06ghz P4-M socket 478 northwood CPU, need to find a compatible mainboard, plz help
- Why is my P4 640 Default multiplier 14x?
- Bad 3dMark 03 Scores, whats wrong?
- Cheapest {Temporary} Route to 4Ghz?
- newb ? regarding OCing Intel 2.8, HT and Prime95
- Advice for Northwood 2.4GHz P4
- Just ordered a P4 3.0, have some questions.
- i875 Pci board?
- Intel Celeron D 310 533MHz FSB any good?
- 20 degrees difference between two Celeron D CPU's?
- Noticed something weird after OC, is this normal?
- Is it worth it? 2.8 to 3.4 478socket
- 4GHZ setup
- Pentium D 920 'Presler'
vBulletin® v3.8.4, Copyright ©2000-2010, Jelsoft Enterprises Ltd.