- Joined
- Jul 1, 2002
- Location
- Manchester, England
just been running memtest 2.9 to try and figure out if my pc 2100 256meg memory module has any errors as Windows XP won't install and I hear it's very fussy about memory. A few errors were reported on test3 and then an error reported on test 4 when I ran the test at nother time. I switched the FSB of my 1900+ from 133 to 100 and the errors have disappeared. Anybody any idea why the errors would dissapear and how to stop them at my CPU's correct speed?
I also ran the test a couple of hours later at FSB of 133/133 and the same error on test 3 with the exact same address came up.
Here's some detailed system info.
--------------------------------
CPU Speed Settings when ERRORS
--------------------------------
FSB = 133
Ratio = 4:2:1
Multiplier x12
Speed Error Hold = disabled
Enhance for benchmark = disabled
CPU Power = CPU Default
Core Voltage = 1.75
I/O Voltage = 3.5
DDR Volt = 2.55
CPU Fast command decode = Normal
--------------------------------
CPU Speed Settings when NO ERRORS
--------------------------------
FSB = 100
Ratio = 4:2:1
Multiplier x12
Speed Error Hold = disabled
Enhance for benchmark = disabled
CPU Power = CPU Default
Core Voltage = 1.75
I/O Voltage = 3.5
DDR Volt = 2.55
CPU Fast command decode = Normal
--------------------------------
PC Health Info when ERRORS
--------------------------------
Sys temp = 32c
CPU temp = 53c
CPU fan spd = 7600rpm
vcore = 1.76v
VIO = 3.5v
+5v = 4.89v
+12v = 12.52 - 12.58v
AGP = 3.5v
DDR = 2.59v
SVSB = 4.92v
VBAT = 3.00v
--------------------------------
PC Health Info when NO ERRORS
--------------------------------
Sys temp = 32c
CPU temp = 49c
CPU fan spd = 7600rpm
vcore = 1.77v
VIO = 3.5v
+5v = 4.91v
+12v = 12.40 - 12.46v
AGP = 3.48 - 3.5v
DDR = 2.59v
SVSB = 4.94v
VBAT = 3.00v
---
mobo Abit KX7-333r
Athlon 1900+
Micron PC2100 256meg
BIOS settings set to default except for RAID which is DISABLED and CPU FSB which is set to 100
I also ran the test a couple of hours later at FSB of 133/133 and the same error on test 3 with the exact same address came up.
Here's some detailed system info.
--------------------------------
CPU Speed Settings when ERRORS
--------------------------------
FSB = 133
Ratio = 4:2:1
Multiplier x12
Speed Error Hold = disabled
Enhance for benchmark = disabled
CPU Power = CPU Default
Core Voltage = 1.75
I/O Voltage = 3.5
DDR Volt = 2.55
CPU Fast command decode = Normal
--------------------------------
CPU Speed Settings when NO ERRORS
--------------------------------
FSB = 100
Ratio = 4:2:1
Multiplier x12
Speed Error Hold = disabled
Enhance for benchmark = disabled
CPU Power = CPU Default
Core Voltage = 1.75
I/O Voltage = 3.5
DDR Volt = 2.55
CPU Fast command decode = Normal
--------------------------------
PC Health Info when ERRORS
--------------------------------
Sys temp = 32c
CPU temp = 53c
CPU fan spd = 7600rpm
vcore = 1.76v
VIO = 3.5v
+5v = 4.89v
+12v = 12.52 - 12.58v
AGP = 3.5v
DDR = 2.59v
SVSB = 4.92v
VBAT = 3.00v
--------------------------------
PC Health Info when NO ERRORS
--------------------------------
Sys temp = 32c
CPU temp = 49c
CPU fan spd = 7600rpm
vcore = 1.77v
VIO = 3.5v
+5v = 4.91v
+12v = 12.40 - 12.46v
AGP = 3.48 - 3.5v
DDR = 2.59v
SVSB = 4.94v
VBAT = 3.00v
---
mobo Abit KX7-333r
Athlon 1900+
Micron PC2100 256meg
BIOS settings set to default except for RAID which is DISABLED and CPU FSB which is set to 100