Bubba
07-15-02, 10:29 AM
I'm almost finished modding my case for my water setup! I've been working on an Antec 1240 and have spent almost all week trying to decide on a couple of different ways of doing it and I also have 2 radiators and couldn't decide which one to use,but once I cut up the case there's no changing my mind so I solved everything and bought another case exactly the same and am going to mod that one for the other rad and the resevoir setup is going to be a little different.I have an Eheim 1250 and I got it to sit on top of my rad with some neoprene under it,the cool thing is that I made a bong resevoir and got it to fit perfectly tight up against the top of the case so I can screw the plug in from the outside top of the case to hold it all in place.Now I can just unscrew the plug and fill it up w/out opening the case.I have a window so that I can see it all.The way the pump sits all I did was drill a hole in the backplate to run the electric cord out the back right next to the PS cord.I'll post some pics of it and the other one with the new idea for the resevoir as soon as I finish with it out in my workshop.By the way,which rad would you use if your choice was either the Aqua Coil from BeCooling or an 89' Chevy Camaro heater core?My setup is all 1/2" fittings.