Finished my window

[wildbilly2k]

Hey finally finished my window what do you think? I think it looks pretty good for a first time. All it needs now is 2 nice red cold cathodes to brighten things up.

[wildbilly2k]

here is my other pic i only have 2 right now cause id like the 56kers to be able to look too

[Starfoxer]

looks nice and clean billy! good job :D

[Oni]

Very nice! I'd clean up those wires a bit, though.

[Shocker]

Nice job!!!hmm is it me or do i see dust inside your case. lol :p

[wildbilly2k]

where is dust i dont see any there will be no dust in my case yeah those wires fell down when i was putting the window in but all those wires have zip ties on them and stuff but i am waiting till i get my lights to clean them up cause that is going to be a mess of wires too

[dansonang]

red cathodes really make a good combi with the red motherboard

[craigiz1]

Really nice. Very clean. I like the window molding too.
GOOD JOB!

[Biohazard]

very nice!! and dont worry about dust!! it very common!

[wildbilly2k]

yeah window molding was a ***** to get in but it was worht it even though my cut was really nice cause it will help when i have black switches with red lights and white case and it holds the window in really tight took about 45minutes to get in. Got the molding at www.2cooltek.com and the other sutff at home depot

[HaywirE]

Looks good to me.

Suggestion

Get some zipties, and zip those powercords up, and get some rounded cables, look's very messy.

[Mike K]

Originally posted by HaywirE
Looks good to me.

Suggestion

Get some zipties, and zip those powercords up, and get some rounded cables, look's very messy.

He doesn't even need rounded cables, his flat cables are not in the way and you can barely see them. Sometimes flat cables are better because you can fold them and get them out of the way even more than rounded cables.

[wildbilly2k]

Originally posted by HaywirE
Looks good to me.

Suggestion

Get some zipties, and zip those powercords up, and get some rounded cables, look's very messy.

there are zip ties on them there is just no where to put the **** cables alright?

[HaywirE]

Well, you could tuck them in somewhere i suppose.

[wildbilly2k]

well im waiting till i get my lights so i can make oen big zip tie clog of wires then zip tie that behind the hard drives

[kooshball]

u think that's messy..u haven't seen my case...

koosh

[wildbilly2k]

hey koosh post some pictures if you have a digital camera but i took some more to explain my wire problem mostly it is the 480w power supply has too many cables

[wildbilly2k]

here is a pic with the front top cover removed lol that is sad

[wildbilly2k]

here is my window by itself from behind

[Ziggey]

Very nice work :)

[HaywirE]

Yeah dude, look's good to me :O

Hey what kinda camera is that?

2.1 Megapixels?

[wildbilly2k]

it is a sony cyber shot p3 2.8megapixels i just didnt have it set at the highest quality

[AZN]

Im not trying to rain on ur parade but... when i want to look at my parts, i leave my side case off. besides most of my attention is on the monitor looking at um...:eek: :eek: :eek: u get the idea.
;) im just messing with u, great job!:cool:
btw. red MB, i never seen that, a gainward would match it.:D

[wildbilly2k]

well msi gefroce 4 ti 4200 are now red so i might get one of those

[Biohazard]

dude nice job agen, lol where did ya get the 12x??? looks SLOW:D:D:D hahaha lmho :D Wires look very neet from whre i am!!!

[wildbilly2k]

it is a 12 x dvd player 40x reader

[Biohazard]

alright sorry :( i missed the DVD bit!!

[JazztrumpetJND]

sweet
now i just need a dremel

[wildbilly2k]

if it makes you feel better ive never used a dremel in my life, i used a jig saw and a drill for the pilot hole on my window

[knif_00]

That's the cats ass dude. . . (that means it's SLICK) Just a run of the mill window addition but it's very clean!! That makes all the difference . . nice dremel work :p
Anywho, I was wondering what kind of molding that was around the window? I didn't put any on my case mod cause it looks just fine w/out any but It'd be nice for future projects to keep those sharp metal edges covered. Can't wait to see it with the cathodes installed. Let me suggest this site for your cathodes ::
http://www.sidewindercomputers.com/casesandmore.html
Go the 8 inch cathode route...
Those are very nice, I got the industrial white cathode for my case and my transparent green window glows. . . TRANSPARENT GREEN! Imagine that lol!

[wildbilly2k]

Originally posted by knif_00
That's the cats ass dude. . . (that means it's SLICK) Just a run of the mill window addition but it's very clean!! That makes all the difference . . nice dremel work :p
Anywho, I was wondering what kind of molding that was around the window? I didn't put any on my case mod cause it looks just fine w/out any but It'd be nice for future projects to keep those sharp metal edges covered. Can't wait to see it with the cathodes installed. Let me suggest this site for your cathodes ::
http://www.sidewindercomputers.com/casesandmore.html
Go the 8 inch cathode route...
Those are very nice, I got the industrial white cathode for my case and my transparent green window glows. . . TRANSPARENT GREEN! Imagine that lol!

well i already know where i am getting the red cold cathodes and it isnt a dremel the molding i got at www.2cooltek.com worked very well it had a thick piece and a thin piece to lock it in place it is on there very tight to

[knif_00]

thanks for the molded link haha get it.....ohhhhhhh nevermind
but yeah thanks wildbilly.....yEEEEEEEEEeeeeeeeeeeeeaaahaaaaaaaaaa aawwww:burn:

[dansonang]

how is the performance of your TDK?

[wildbilly2k]

well it burns at 40x/12x/48x it works well except it burns really fat with 32x and 40x cds but since i have 16x cds it burns slower which sucks