PDA

View Full Version : Temp Question


FrankMasterFlash
01-03-01, 09:50 PM
Is 60*C (140*F) too hot for a PII 400@533 under full load? Not a high quality HSF just some $10 generic one.

kat
01-03-01, 10:24 PM
I know that amd runs hotter than intel and that would be dam hot for my tbird you better get a new heatsink

Napalm
01-06-01, 06:20 PM
Yes, thats far too hot for an Intel chip, im surprised it runs at that temp

Tim-
01-06-01, 06:49 PM
If was any Intel except a PII 400 it probably wouldn't be running. They are a hot SOB anyway, but a new heatsink/fan is called for here.

FrankMasterFlash
01-07-01, 01:24 AM
Thanks, I did lower the temp 8-12*F.
I cleaned off the thermal paste then cleaned the core with rubbing alcohol on a cotton ball. I Let it dry then reapplied the paste and the temps dropped.

FrankMasterFlash
01-07-01, 01:25 AM
Thanks, I did lower the temp 8-12*F.
I cleaned off the thermal paste then cleaned the core with rubbing alcohol on a cotton ball. I Let it dry then reapplied the paste and the temps dropped.