wcpuid 3.0

[omniskillz]

for some reason its saying my multiplyer is 16... and my system bus is 181 when its 171.... whats wrong here?

[jdmcnudgent]

thats because you are using the very first version. try this one.

[omniskillz]

ah thanks again brother, u come thru for me again =p haha.. is there any settings on the asus p4t533 that i should set .... right now i seem to be stable at 163mhz 4x i broke the 4000meg mem bandwidth barrier =)

[omniskillz]

oh and your wcpuid works a ok!

[jdmcnudgent]

i dont think anything special, i just turned the raid off, via jumper. i would almost just run at that speed, because you would need like 190+ fsb running the mem at 3x to make up that bandwidth, nice job.:D

[jdmcnudgent]

didnt i tell you that mother board kicks a$$? now tell me, wasnt it worth calling me on the phone. another happy overclocker:
priceless

[omniskillz]

hey bro i got a geforce 3... in bios for agp it says uc or ucwc or something... what is that? it says only choose ucwc if the card supports it?? does geforce 3 support that?? and what did u set ur agp apeture size to? is there any other benchmarks worth posting?

[rlemieux]

yall mind posting some benchmarks, I gotta send back my TH7II and I am thinking about picking the P4T533up with some Rimm4200.

[omniskillz]

which bench marks do u want ?? tell me and ill try em

[rlemieux]

well some sandra scores would be nice, maybe PCMark, Prime 95, Super PI, whatever. I just would like to see how the Rimm4200 effects scores. Thanks.

[jdmcnudgent]

Originally posted by rlemieux
well some sandra scores would be nice, maybe PCMark, Prime 95, Super PI, whatever. I just would like to see how the Rimm4200 effects scores. Thanks. what do you think the scores would be like with a 4200 rimm running at 163x4=1304.:D

[jdmcnudgent]

here is 140x4 with out turbo.:D

[Rasputin'sLiver]

Originally posted by omniskillz
ah thanks again brother, u come thru for me again =p haha.. is there any settings on the asus p4t533 that i should set .... right now i seem to be stable at 163mhz 4x i broke the 4000meg mem bandwidth barrier =)

man am i jealous omni! i want that mobo bad! great bandwidth. 4000+ is amazing!

[Rasputin'sLiver]

Originally posted by jdmcnudgent
didnt i tell you that mother board kicks a$$? now tell me, wasnt it worth calling me on the phone. another happy overclocker:
priceless

i HATE you guys! LOL!

[jdmcnudgent]

:eek:

[Rasputin'sLiver]

Originally posted by jdmcnudgent
:eek:

yep, i really, really, hate you guys. where do i score one of those mobos btw!

[jdmcnudgent]

Originally posted by Rasputin'sLiver


yep, i really, really, hate you guys. where do i score one of those mobos btw! price watch, ata.com, like $295 shipped.:D

[Rasputin'sLiver]

Originally posted by jdmcnudgent
price watch, ata.com, like $295 shipped.:D

that's an excellent price! i looked at the egg and atacom blows the egg's price away! did you have any prob. with atacom? they don't have the greatest reseller rating.....

[omniskillz]

i didnt have any problems with them ras, got my shipment in about a week 5 dollars ground shipping ups.. turbo is enabled

[omniskillz]

turbo enabled

[omniskillz]

once in awhile my system will reboot at this speed 4x at 163mhz bus... is it ram or cpu volts?? do i need more volts??? or is ram at its limits at 4x????? i cant update bios yet cuz i killed my floppy im hoping new bios will help what do u guys think?

[Rasputin'sLiver]

Originally posted by omniskillz
i didnt have any problems with them ras, got my shipment in about a week 5 dollars ground shipping ups.. turbo is enabled

omfg! i really, really, really, really, hate you guys.....

[rlemieux]

whats the highest FSB allowed on the P4T533?

[omniskillz]

200mhz fsb is the highest setting in bios for asus p4t533

[rlemieux]

ok, just wanted to make sure it was something that was high enough I wouldnt be worried.

[micamica1217]

Originally posted by Rasputin'sLiver


omfg! i really, really, really, really, hate you guys.....

lol...I love to hear good news.

great scores you guys got.

yet I'll have to wait for this mobo.

mica

[Rasputin'sLiver]

Originally posted by micamica1217


lol...I love to hear good news.

great scores you guys got.

yet I'll have to wait for this mobo.

mica

u know i'm just kiddin them, but i'd really like to get that board.

i have to wait a little while also. i might try to sell my bd7ii-r, but still, that asus is a little pricey.....

[micamica1217]

Originally posted by Rasputin'sLiver


u know i'm just kiddin them, but i'd really like to get that board.

i have to wait a little while also. i might try to sell my bd7ii-r, but still, that asus is a little pricey.....

I know you're kidding....and yes it's pricey.

thats why I will wait.

mica

[jdmcnudgent]

Originally posted by Rasputin'sLiver


u know i'm just kiddin them, but i'd really like to get that board.

i have to wait a little while also. i might try to sell my bd7ii-r, but still, that asus is a little pricey..... not really, less than $150 each for a mobo and a 256 stick of mem.:D

[Maxvla]

Originally posted by micamica1217


I know you're kidding....and yes it's pricey.

thats why I will wait.

mica
wtf is that avatar?

[omniskillz]

i dunno... i think i need more ram and a new hard drive, plus the floppy even when im at default 2.26 my system seems to be laggy at times.... seems to crawl personally i really cant notice the diff between this system and my p3 800 when it comes to applications .. games i get more fps at higher quality but thats it, load time is faster yes but not that noticable...im wondering if my chips not stable, maybe ram... i just cant figure it out... im already way over my budget but i think im gonna get the maxtor 80gig ata 133 hd drive for 80 bucks and order more ram and a floppy to update the bios and see if i still have these creeping laggy feeling:rolleyes:

[micamica1217]

Originally posted by Maxvla

wtf is that avatar?

it's a 8x10 hologram of a lady with wires and gears in her mouth and eyes. (like a robot).

it's sooooo cool.:cool:

her face pops out about 4 or 5 inchs from the glass.

if I'm not mistaken it's a "one of a kind".

why can't we have 3d avitars???

mica

[omniskillz]

lol nice mica, question, in the sisoft sandra benchmark for cpu aritmatic i get lower readings then normal could this be because my cpu is not getting enuff voltage? cuz the bottom portion is above average

nope its not the voltage... this is really disturbing wow im going crazy here... i guess i have to buy a floppy =(

[jdmcnudgent]

Originally posted by omniskillz
lol nice mica, question, in the sisoft sandra benchmark for cpu aritmatic i get lower readings then normal could this be because my cpu is not getting enuff voltage? cuz the bottom portion is above average

nope its not the voltage... this is really disturbing wow im going crazy here... i guess i have to buy a floppy =( if it is socring low, i would think its because of heat.:( what r temps?

[omniskillz]

temps are good hottest i seen it go is 41c, i ran the test over and over again back to stock fsb and volts first time i got low alu again but second time on it went to normal levels.. could it be just software? JD have you tried using that asus utlility to update your bios? does it work for u.. mine doesnt.. i'd download the bios but it doesnt update it downloads and then just closes or shuts off

[jdmcnudgent]

something isnt right, this is what i get at 2240.:D

[omniskillz]

yeah what could it be... the floating point calculations are higher than average but the alu is real low... i dont understand =(

[jdmcnudgent]

Originally posted by omniskillz
yeah what could it be... the floating point calculations are higher than average but the alu is real low... i dont understand =( dunno, but i have very exceptional cooling, my cpu says 10' in windows right now and the vapo says -23.:D

[micamica1217]

omni,

I would first try to restart comp. and run the test again.
now close the proggie down and run a test again.
any change???

if you notice no diffrance then look at what your swap file is like.
do you set up the virtual memory, or let winblows do it???
what setting????

I'm realy guessing, but you could try to reinstall sandra.

mica