Overclocking the Multiplier and Voltage on the CPU.

[cyberixus]

I got to know my motherboard Iwill KV200 doesn't support multipliers adjustments. :(

Then, I found out that overclocking the multiplier is still possible from www.ocinside.de/html/main_workshop.html
All I need to do is change the points connected on the L3, L4 and L5 bridges.

Similiarly, I can also change the Vcore (voltage) by altering the points connected on the L7 bridge.

So far, www.ocinside.de is the only info I have regarding this method of overclocking. And no one seemed to have mentioned this method apart from Slayn.

Overclockers who have tried this method.... I really appreciate your views on this.

Slayn, do keep me posted on your progress. Where did you find out about this method of overclocking?

Thanks everyone and have a nice overclocking day.:burn:

[wildbilly2k]

i would have to say good luck if you have to break any bridges me and my friend tried for hours to cut one but it never worked it was almost to the point where you couldnt see the bridge at all but the voltage went to 1.85 instead of 1.75 so it was a failure. He is running a duron 900 though

[cyberixus]

I cut the bridges using a sharp pen knife and reconnect some using pencil according to www.ocinside.com

Just go through and fro across the bridges with the penknife.

Now I am in trouble coz there's no POST and there's no memory check.... no boot..... but the fans are running fine.

I change the bridges on my Duron 650 to 850.... no change in Voltage..1.57v.

Anyone knows what went wrong? and how to solve this?
Thank you.