hey ol man, check this out.

[jdmcnudgent]

scrole all the way down to the bottom.:D now thats overclocking.:cool: here is linky (http://www.vapochill.com/forum/showthread.php?postid=5156#post5156) :p

[Maxvla]

3400mhz :eek:

[JCviggen]

not bad ... but it aint no 100% overclock :p

http://users.pandora.be/JCviggen/1.6A200.JPG

P4T533 , RDRAM at 3x mode , so 200x3

http://users.pandora.be/JCviggen/sandra200.JPG

[jdmcnudgent]

too sweet JC.:D where you been bud???:p what asus board r u using?

[JCviggen]

Originally posted by jdmcnudgent
too sweet JC.:D where you been bud???:p what asus board r u using?

yeah havent been here a while I guess ;)

This is the P4T533 board with 32-bit RIMMs.
Its a nightmare, unstable POS... but with some modding its running ok (I added 2 huge 3300 uF capacitors to the board, and 4 33 uF tantalum caps, and a Vrimm mod to 2.98Vrimm instead of 2.50)

BTW, it'll boot at 175x4 too... nice mem benches

http://users.pandora.be/JCviggen/sandra175x4.JPG


I'm in the market for a 2.66/2.80 P4 now. I intend 3.7 GHz . 4 GHz with LN2 in september

[jdmcnudgent]

too sweet, the oc man.:D

[CSHawkeye]

man you guys are crazy, and i thought being at 3ghz is sick you guys take the cake.

[Big Nuttz]

Originally posted by JCviggen


yeah havent been here a while I guess ;)

This is the P4T533 board with 32-bit RIMMs.
Its a nightmare, unstable POS... but with some modding its running ok (I added 2 huge 3300 uF capacitors to the board, and 4 33 uF tantalum caps, and a Vrimm mod to 2.98Vrimm instead of 2.50)

BTW, it'll boot at 175x4 too... nice mem benches

http://users.pandora.be/JCviggen/sandra175x4.JPG


I'm in the market for a 2.66/2.80 P4 now. I intend 3.7 GHz . 4 GHz with LN2 in september I read your posts over at the [H]ard Forum. Can you post some pics of your mods. I have that board and can not get stability. Thanks

[JCviggen]

dont have a digicam :(

[Big Nuttz]

If you happen to ever get pics of find a guide could you please post it.

[residentevil2]

man you p4 guys make me sick lol sweet o/c and nice memory benchie.

Btw u using watercooling or something to get that 3.2gig are u also vmodding the p4.

I got 2 gig on my axp 4 days ago nothing compared to u but its great for a old timmer 2000+

[micamica1217]

Originally posted by residentevil2
man you p4 guys make me sick lol sweet o/c and nice memory benchie.

Btw u using watercooling or something to get that 3.2gig are u also vmodding the p4.

I got 2 gig on my axp 4 days ago nothing compared to u but its great for a old timmer 2000+

that is a nice OC man.

mica

[jdmcnudgent]

Originally posted by residentevil2
man you p4 guys make me sick lol sweet o/c and nice memory benchie.

Btw u using watercooling or something to get that 3.2gig are u also vmodding the p4.

I got 2 gig on my axp 4 days ago nothing compared to u but its great for a old timmer 2000+ he is using phase cooling= promethia, very cold.:D

[Maxvla]

holy (censored)! now thats a nice 1.6a :D

[AZN]

nice oc on the 1.6a and the 2.26. i wonder how a rdr would do on his system
BTW... what is hawkye doing there?
AZN

[asw7576]

Damn... Nice OC JC!!! Again... Damn..!!!

Regarding more capacitors, Where do you add them? In parallel? On the back of motherboard? Would you share with us?

I have some Nichikon capacitors lying in my drawers (1200uF @ 10V, 2200uF @ 16V ). I think this is interesting topic "adding more capacitors".

[JCviggen]

I added 4 33 uF tantalum caps in parallell to 4 existing caps to filter out high frequency noise... for the low frequency, 2 big ass 3300 uF caps were added in parallell to each group of 2 caps already on the board. Its a bit hard to explain which caps exactly, but it doesnt really matter for an example...

[Rasputin'sLiver]

Originally posted by JCviggen
not bad ... but it aint no 100% overclock :p



yer a monsta! :eek:

nice o/c man... i'm assuming that's not your running speed but man, that's an impressive set of benchies dude...:eek: :beer:

[asw7576]

JC, Last night I put one 1000uF @10V capacitor in parallel to capacitors near processor area (there are 6 of them), and two 1000uF @10V capacitors in parallel close to Memory's Voltage Generator / MosFet.

(Honestly, I really don't know where to put the caps in the right place. I just assume where it should by common sense. So, people ..... I might be wrong and this mod. is unnecessary).

And the results:...... 1 extra FSB increase (143MHz). At 145FSB, the computer now can boot, but didn't finish loading Windows.

Previously, the comp. cannot boot at all at 145FSB. I am working very hard to get my Mushkin PC3200 to work at 145 FSB at 3:4 setting. Is there anyway to increase the current or improve signal? My problem is memory because the proc. is stable at 150FSB at 1:1 setting.

Thanks JC. Anyone are welcome too.

Here a picture of where i mod the caps.

[Dirty_Punk]

a 100% overclock like this?
http://digilander.libero.it/DirtyPunker/16a3208-pi56s.jpg
hehe, thi is my pretty 1600 under the hands of DDA, a great italian overclockers... i can do only 3080 for now with my system, but soon i'll hit 3200mhz, very soon!!!!:D ;)

[asw7576]

Here the picture where I add some capacitors:

one 1000uF @ 10V at CPU area
two 1000uF @ 10V at Memory Slot Area
All caps. are soldered on the back of mobo, in parallel.

[JCviggen]

Dirty punk, it IS a lot harder to hit a 100% overclock on an RDRAM board, but its still nice even with DDR ;)

[Dirty_Punk]

Originally posted by JCviggen
Dirty punk, it IS a lot harder to hit a 100% overclock on an RDRAM board, but its still nice even with DDR ;)

with an Th7-II is harder, or with pc800 is harder, yes, but with p4t533 with rdrmem that support up to 170mhz 4x or more than 200 3x i think it's not so harder... but i have never tryed it, so i can't be sure...

what's your vcore for 3200????

[JCviggen]

Vcore was in the mid-1.80 range. And this board refused to do even 170x3 before some mods :eek:

For the record, I once managed 196 FSB on the TH7-II ... never made it to 200 :(

[Dirty_Punk]

Originally posted by JCviggen
Vcore was in the mid-1.80 range. And this board refused to do even 170x3 before some mods :eek:

For the record, I once managed 196 FSB on the TH7-II ... never made it to 200 :(

what?? need mods to do over 170?? not a good board... i think there isn't any mod to do, that the rdram were the only limit...

i want abit 32bit rdram board!!!! not the **** of asus!!!

durondude of icrontic can do 200mhz fsb with th7-ii ;)

[Dirty_Punk]

ah, whats your best time in superpi with rdram (with the 1600, not with a 2260 that clock easier and highter)

[JCviggen]

Originally posted by Dirty_Punk
ah, whats your best time in superpi with rdram (with the 1600, not with a 2260 that clock easier and highter)

I think 54 secs with the 1.6A and 52 with the 2.26, although i'm not sure about that. I'll try and re-run it

oh, and btw, I am DuronDude from Icrontic... lol
Was my old name in the days I started off with Duron overclocking...

[Dirty_Punk]

hehe, durondude!!!

but hte screen you post with 1600@3200 isn't with the th7-II in icrontic signature!!!! i think it was with it!!!!
but is full stable at 3200??
it isn't so low ~1.8v?? my friend do 3200 (i think very unstable, but enought for s.pi) with 1.88v and swiftec with 226w plet, what type of cooling have you got?? a vapo-clone?

[Dirty_Punk]

hey, you are 1 year older than me! :D :D :p

most overclockers are much older.. :) :beer: