Trying to unlock my 1800+ please help!

[Brunt]

Ok well...I have read the articals and such...but..
bought the rear window defog kit...I used a crayon to fill in the gaps. The Crayon is doing fine! My problem is...when I go use the conduvtice liquid, bridge #1 goes fine...bridge #2 goes fine...but then when I pull the masking off, the stuff from the first bridge comes off! It dries...so I dont know what to do..I only have about a 2x magnafying glass...so this is kinda getting me frustrated. Is there a better tape to use for this? I am using the brush it came with to put it on...I tried to use a safety pin, but I couldn't get enough on it to drip or drag a line. How long should I wait between bridges??

[beau_safken]

Till its a little dry....If it dries all the way then it will adhere to the tape. Or you can CAREFULLY use a razor blade to score the defogger paint to make sure it doesn't cling to the tape. Other then that.................

Buy a 1600+ instead. I tried unlocking my 1800+ and the best I ever got was 1750...Was very unstable and didn't like me much after hitting 1750. But this AGOIA "Y" 1600+ hit 1798 out of the box. Didn't even need to unlock or anything. It could go higher but I'm allowing a little break in time. Just an idea...Then again if you are using watercooling and Some HELLA nice ram your could easily break my 1750 record.

[Brunt]

ok at this point...I am not even using the magnafying glass...and I am giving it about 10 mins between bridges to dry..so far, I have 2 of them done...and working on the 3rd and 1st at the same time..but leaving #1 on a little longer, it was a little thicker.

[Brunt]

Well...at my first attempt to unlock the cpu..it sorta worked...I have some new multipliers...but not the ones I wanted lol. I can go higher...but not lower! Guess I will have to try again..

[residentevil2]

i just use a little pin and dip it in this stuff called Nickle Print it works great i use that silicon thermal stuff that white stuff to fill my gaps in

I dont need a madnfying glass i just carfully make lines across the L 1