Help OC Gigabyte 8IHXP Please

[Dizzy in Dallas]

I am new to overclocking so bear with me if I do not use the correct verbage.
My system is 2.26B/Gigabyte 8IHXP/Kinston PC 1066 (A01 34NS)
512 Total 2 sticks of 256. 350 Power supply
I want to overclock as high as possible with factory Intel heat sink and fan.
So far I have the FSB to 145(2465) with only other adjustment in BIOS being Overrim voltage "Enable"
It is rock stable at 145 with no heat issue (45c)
My next Bois option is 148, But when I go change to 148 F10 and save/continue it boots goes out (nothing on screen/no video).
I have to unplug outlet from wall and plug back in. Then it boots up and says "Cpu is at wrong setting" so I have to go back onto Bios and go go back to 145.
I have the memory in the first 2 slots closest to the CPU and the crimss in the 2 slots farthest away from CPU. I am assuming that correct? (1and 2 for memory) and 3 and 4 for crimss.
I have tried various combinations of raising the Vcore threw1.575 so on and the memory from 800 to 1066 but it still comes back with "CPU is at wrong setting" at 148FSB.Can some help me with this? What else can I do? I do not think this is a heat issue or a memory issue because it says "Cpu at wrong setting". I think I should be able to go past 145. Can some help me get to the 148 hurdle I am stuck at please?.

[batboy]

Please don't double post. This probably should be in the Gigabyte mobo section.

[jdmcnudgent]

Originally posted by batboy
Please don't double post. This probably should be in the Gigabyte mobo section. here here.:D

[none1]

Originally posted by batboy
Please don't double post. This probably should be in the Gigabyte mobo section.

Well, that might work if there WERE a Gigabyte mobo section FOR INTEL. :-)

I've had similar issues with a new gigabyte board. The "other intel boards" probably have someone who knows about gigabyte boards ...... but the intel CPU forum folks know about vidpin .......

Double posting is frowned upon, but I can see why there would be an issue deciding where to post. In the future Dizzy, if two forums seem appropriate, try posting in just one forum, if no one responds, try the other forum a couple days later.

Unfortuneately, I have a gigabyte board that has NO voltage control. :-( GA-8SIMLP My 1.8 is stuck at 121 FSB, Can't get to 125. YUCK. I can, however, crank my ram up to 380. !!!!

SO, where do I go next? I've been reading the vpin stickies in the intel mobo forums. If you're comfortable, looks like manually upping the voltage is the way to get higher FSB. You can read all about it here in the intel CPU forum.

For other MB ideas, I'll go respond in the MB forum. :-)