hi........
I WANT TO PUT MY CELERON 1.1GHZ SL5XR ON MY OLDER MOTHERBOARDS ........I HAVE :AGA-686LX4.....THAT I HAVE UPDATE WITH THE LATTEST BIOS AND HAVE JUST UP TO 100MHZ DIPSWICH ON THE BOARD AND UP TO 5.5 MULTIPLY FACTOR.....A HOT 661 THAT HAVE UP TO 150 MHZ DIPSWICH AND ....AUTO + UP TO 5 MULTIPLY SWICH ........A M726 THAT HAVE UP TO 133 MHZ SWITCH +UP TO 8 MULTIPLY SWITCH .....AND A DELL COMPUTER OPTIPLEX GX1p..........ALL THIS ARE SLOT 1 MOTHERBOARD AND I WANTED TO UPDATE THIS BOARDS TO TAKE BIGGER PROCESSORS AN I BOUGHT A ASUS 370 SLOKET ...S370-DL REV1.02 FABRICATED END OF 2001 ....AND I HAVE ALSO A 370 SLOKET WITH AUTO SWICH NOT WITH VOLTAGE ON BOARD LIKE ASUS SLOKET .MY PROBLEM IS THAT WHEN TO PUT ON ANY OF THIS SLOKETS ANY OF LOWER CELERONS LIKE 400 MHZ SL3A2 OR CIRYX 600 MHZ I HAVE NOT ANY PROBLEM RUNNING THE MOTHERBOARDS BUTH AFTER I PUT A CELERON 733MHZ SL4P3 OR THE 1.1GHZ SL5X5 THE MOTHERBOARDS FAIL TO START ......ON THE DELL 733 MHZ WORKS BUTH THE BIGGER ONE IS NOT WORKING ......AS I BEEN TO VARIOS FORUMS TO LOOK FOR INFORMATION REGARDING THIS INFORMATIONS FOR UPGRADING THE PROCESSORS I REALIZE THAT IT IS POSIBLE TO WORK UP TO 1.4 GHZ ON THE BX MOTHERBOARDS ......BUTH MOST THE INFORMATIONS ARE ON TUALATIN PROCESSORS AND MINE IS NOT A TUALATIN ......PLEASE HELP ME TO KNOW WHAT PINS TO ISOLATED OR WHAT MODIFICATION TO MAKE ON THE SLOKET TO MAKE MY PROCESSORS TO WORK ON MY MOTHERBOARDS .THANK YOU VERY MUCH...............PLEASE SOMEONE HELP ME.Tank you
I WANT TO PUT MY CELERON 1.1GHZ SL5XR ON MY OLDER MOTHERBOARDS ........I HAVE :AGA-686LX4.....THAT I HAVE UPDATE WITH THE LATTEST BIOS AND HAVE JUST UP TO 100MHZ DIPSWICH ON THE BOARD AND UP TO 5.5 MULTIPLY FACTOR.....A HOT 661 THAT HAVE UP TO 150 MHZ DIPSWICH AND ....AUTO + UP TO 5 MULTIPLY SWICH ........A M726 THAT HAVE UP TO 133 MHZ SWITCH +UP TO 8 MULTIPLY SWITCH .....AND A DELL COMPUTER OPTIPLEX GX1p..........ALL THIS ARE SLOT 1 MOTHERBOARD AND I WANTED TO UPDATE THIS BOARDS TO TAKE BIGGER PROCESSORS AN I BOUGHT A ASUS 370 SLOKET ...S370-DL REV1.02 FABRICATED END OF 2001 ....AND I HAVE ALSO A 370 SLOKET WITH AUTO SWICH NOT WITH VOLTAGE ON BOARD LIKE ASUS SLOKET .MY PROBLEM IS THAT WHEN TO PUT ON ANY OF THIS SLOKETS ANY OF LOWER CELERONS LIKE 400 MHZ SL3A2 OR CIRYX 600 MHZ I HAVE NOT ANY PROBLEM RUNNING THE MOTHERBOARDS BUTH AFTER I PUT A CELERON 733MHZ SL4P3 OR THE 1.1GHZ SL5X5 THE MOTHERBOARDS FAIL TO START ......ON THE DELL 733 MHZ WORKS BUTH THE BIGGER ONE IS NOT WORKING ......AS I BEEN TO VARIOS FORUMS TO LOOK FOR INFORMATION REGARDING THIS INFORMATIONS FOR UPGRADING THE PROCESSORS I REALIZE THAT IT IS POSIBLE TO WORK UP TO 1.4 GHZ ON THE BX MOTHERBOARDS ......BUTH MOST THE INFORMATIONS ARE ON TUALATIN PROCESSORS AND MINE IS NOT A TUALATIN ......PLEASE HELP ME TO KNOW WHAT PINS TO ISOLATED OR WHAT MODIFICATION TO MAKE ON THE SLOKET TO MAKE MY PROCESSORS TO WORK ON MY MOTHERBOARDS .THANK YOU VERY MUCH...............PLEASE SOMEONE HELP ME.Tank you
Last edited:
