1600+ AGOIA O/C Results!!!!! (locked) (pics)

[Codeman05]

Well guys my 1600+ AGIOA Y 0213 is doing awesome. Its still locked and I'm running stock voltages :D But I'm able to churn out: 1838MHz (10.5 x 175) and I haven't yet hit the FSB barrier.
Here are some pics, for some reason WUCPID and MBM5 read my FSB 1Mhz higher then it is set in the bios, not sure why.

http://www.JeepYJ.net/oc/wucpid.JPG

http://www.JeepYJ.net/oc/mem.JPG

http://www.JeepYJ.net/oc/cpu.JPG

I'll try and see how much higher I can get the FSB at 10.5multi this weekend and then probably unlock it and see if I can get any more speed out of it.
Thanks!

[gooutside]

what voltage are u using? nice job anyway. =)

[Codeman05]

using 1.75 on the core and 2.6 on the ram. So I think this chip still has some room left to OC

[maxima88]

Great o/c!!!

[OC-Master]

I have seen 1.90GHz with 1.85Vcore using 181FSB. The 1600+ was still locked (10.5x181) which was 1.9GHz and that was air cooled without any voltage mods. That was an AROIA YR and that was the limit of the CPU without excess voltage or cooling.

Your CPU should near that if you got an AROIA Y or AGOIA Y.

Good luck and maybe someone will be the first to hit 183FSB on the 1600+ while its still locked LOL.


DS-Master

[nikhsub1]

Originally posted by DS-Master
I have seen 1.90GHz with 1.85Vcore using 181FSB. The 1600+ was still locked (10.5x181) which was 1.9GHz and that was air cooled without any voltage mods. That was an AROIA YR and that was the limit of the CPU without excess voltage or cooling.

Your CPU should near that if you got an AROIA Y or AGOIA Y.

Good luck and maybe someone will be the first to hit 183FSB on the 1600+ while its still locked LOL.


DS-Master
I can get up to 188FSB locked but at 2.2V:D

[Mr Ripper]

The cpu I just got seems pretty nice too. My old 1500+ AGKGA 9 0139 sucked as it only goto about 1500mhz without going crazy with the voltages. However my 1600+ AGOIA K 0212 is at 10.5 x 172 at stock voltage. Haven't tried any higher yet.

Need to find out if my hd can handle higher fsbs. Just bought a maxtor dimondmax plus 9 60gb ata 133 and wanna find out if its any better at high fsbs.

[Yodums]

Nice overclock but your memory bandwidth seems rather low. Are you are at CAS2.5 or 2?

[Codeman05]

I think when I ran that test is was at 2.5 and maybe 1-2 of the other settings were turned down. I'll try it again later with aggressive timings. What do you think I should be getting??

[Codeman05]

ok now I'm getting 2639 / 2469 that sound better?

[maxima88]

We have the same memory and I've gotten 2820 in Sandra Memory test. I'd post a pic but it's too small at 300x300 which is the max size I can attach.

[gooutside]

mine does 1.9ghz with 1.90v, but BSODS at 1.85v.

right now i'm at 172x10.5, which is about 1.8Ghz but it does it at stock voltages. mine's also an AGOIA Y

[CrackPot]

Right now mine does 1900mhz @ 1.85v and it's perfectly stable. I've been running Prime now for about 2 days and don't think I have reached it's limit :).

BTW it's an AGOIA/Y 0213 too.

[Codeman05]

Originally posted by maxima88
We have the same memory and I've gotten 2820 in Sandra Memory test. I'd post a pic but it's too small at 300x300 which is the max size I can attach.

Well, part of the problem is that the only setting I can up is change the CAS to 2, and enable 1t. If I advance any other setting windows will not boot...really weird considering that the ram is technically running underspec at 175.
Plus your FSB is running a bit higher.

I'll play with it some more this weekend, I'm gonna see how close to 2GHz I can hit :D

[Codeman05]

Unlocked the chip today and now running stable at 10x188 :burn:
Running at 1.85core/2.7ddr and temps are looking like 35C idle and 39C load after several hours of prime. I'll try and post some pics later, I'm having some FTP issues with my site.
wish this board had a 1/6th divisor!!! I think my PCI/AGP buses crap out on my any higher on the FSB. I'll try more after I burn in for a bit