Please Help Me

[doily384]

my bro just bought a 1900+ and we found out that for somereason it was running at 1.2 not 1.6 so i decided to try and fix it with the fsb and multiplier, stupid me. so now when i try to turn it on, nothing boots up. is there anyway to reverse this becasue not even bios comes up. pleeeeeeez help me!!!!!!
thanx matt

[ManOfKnight]

reset your BIOS...use the jumper or if it is able to start the fans...pull out your CMOS battery while running and pull the plug, wait for the fans to stop spinning...replace battery...reboot

[rippedsocks]

to add to your comment NyTe u also (one some older mobo's) have to short solder points with something metal (i use a butter knife) that are usually neer the onboard battery.... alo dont touch the multiplyer just make sure the fsb is 133 and ur set

[Caffinehog]

You just need to set the bus to 133 mhz. 100mhz X 12 = 1.2ghz.
133mhz X 12 = 1.6ghz.

Hope that helps!