PDA

View Full Version : question


water_cooler 20
10-19-02, 03:44 PM
should i have my heater core on the out side of my case or the inside

SkiFletch
10-19-02, 04:56 PM
up to you. outside in general can be used to get slightly lower temps, but its kind of a pain in the ass routing the tubes exteriorally... your choice

AMDninjaboy
10-19-02, 04:59 PM
Its best if you can mount it outside the case.. that way when its goin its not blowin heat into your puter or blowin hot air from inside your puter through the core. Most of what Ive seen guys do put them in the front of the case under like the hard drive with a hole out the front of the case blowing cold air from the outside through the core.:burn:

masitti
10-19-02, 05:05 PM
Originally posted by AMDninjaboy
Its best if you can mount it outside the case.. that way when its goin its not blowin heat into your puter or blowin hot air from inside your puter through the core. Most of what Ive seen guys do put them in the front of the case under like the hard drive with a hole out the front of the case blowing cold air from the outside through the core.:burn:

The air that passes through the heatercore is maybe 2c warmer.. AT MOST. It is not all that warmer... inside or outside, you are gonna get about the same temps, with maybe outside yielding a bit cooler...

JFettig
10-19-02, 06:02 PM
i measured, with an overclock its like .9c

JFettig
10-19-02, 06:08 PM
nvm compunurse is telling me 1.8c and thats with 88cfm with higher flow it would be lower

The Spyder
10-19-02, 06:15 PM
mines outside my houses window~ giving me 34c temp at 1953 :)