-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
dram overclock good ?
- Thread starter jarett
- Start date
- Joined
- Mar 13, 2001
- Location
- Connecticut
Depends on the particular memory used.
Some overclocks well some does not. Same with rambus.
In general rdram will not overclock to as high a fsb.
Some overclocks well some does not. Same with rambus.
In general rdram will not overclock to as high a fsb.
- Joined
- Mar 13, 2001
- Location
- Connecticut
The better stuff will go to a 150-155fsb at full speed (x4) default voltage.
- Joined
- Mar 13, 2001
- Location
- Connecticut
Yes that is one of the better brands right now.
- Joined
- Mar 13, 2001
- Location
- Connecticut
Depends on the P4 cpu a 1.8a yes a 2.26b probably not.
You need to find out the average max overclock for the cpu on air then determine the fsb needed to run that speed.
Post the cpu you plan to use.
You need to find out the average max overclock for the cpu on air then determine the fsb needed to run that speed.
Post the cpu you plan to use.
- Joined
- Mar 13, 2001
- Location
- Connecticut
2933mhz is a 400mhz oc.
154fsb.
No idea if that cpu can usually oc that high on air, ask in the intel cpu section.
The memory should be ok but borderline. Make sure the motherboard goes to 154fsb not all do.
154fsb.
No idea if that cpu can usually oc that high on air, ask in the intel cpu section.
The memory should be ok but borderline. Make sure the motherboard goes to 154fsb not all do.
Similar threads
