new XP 2400 wont post to Bios?

[Geobronc]

Just got a XP2400, flashed the bois of my Asus A7V333 from 1008 to 1012 (which supports XP2400).

Turned on the PC and it wont Post to Bios. I put my XP1900 back in and its posts fine. Do I have a bad XP2400? I cant believe a new XP2400 doesnt post!!

Is the XP2200 a Thoughobred also?

I may have to settle for a XP2200 because I bought the last XP2400 the store had! grrrr......

[deathstar13]

sounds like its bad. let em test it at the shop.
and yeh the 2200 is a tbred also. the later weeks seem to oc decent also. mine is a week34 and does 2ghz no prob.

[ntpphong]

there is a newer bios version, the 1014

[Geobronc]

I know there is a new BIOS (1014) but the tech support guy at ASUS said that the 1012 should work fine for me. I am going to have the shop test the chip later today.

[Jstic]

If your board has a jumper to put the board in jumper free mode, then keep it in jumper mode and try to boot. I had success with the 2200 on a different Asus board using this technique.

[maxima88]

What was your vcore at?
I think I read somewhere that the XP2400+ vcore should be 1.61v and that if the some ppl had problems when the vcore was set higher. It's worth a shot.

[Geobronc]

Good news! I found the problem! I had a bent pin. I dont know how it happened, but I managed to bend it back straight.

The store I bought it from tested it and it posted fine!

I will have to try it out again tonight when I get home to see if I can get it to post into Bios and then run in windows XP.

[Geobronc]

Woohoo!! it posted. Now overclocking to 2100 (15x140)!