Help me go higher

[shill82]

I've had this CPU for about 5 months it is a AGIOA - 4 it peaks at around 60c on the on die temp on my Epox my mobo temp rages from 26-30c. I have it running at 1.9v it is 100% stable at 1743 10.5x166 I really want to push it father but it gets very unstable at anything higher than this. My temp seems pretty high to me for what I'm running I have a Glaciator 2 on the chip which isn't great but it should give better reults than it is giving. Also my Enermax 5v line is somewhat low often times dipping into the low 4.7 range. What do you think the problem is or is it a combo? Please help me get higher.

Thanks
Shawn

[cypher]

How high are your temps? Have you tried to relax the memory timings or up the voltage on them? How big is the PSU and what else is in the case, you may be overwoorking it.

[shill82]

I've been able to loop DocMemory for hours on end at 172 without any errors so i don't think that is my problem 172 is my goal btw. My PSU is a 350 Enermax. And my CPU temps are about 60c which seems high too me I think I should be doing better with my Glaciator 2 and Artic Silver 3 but can't figure out why I'm not.

Shawn

[malon]

Get a better cooler ! that was my problem when I had my old volcano 7... I bought the slk-800/tornado combo and problem solved ;)

[RoadWarrior]

There are some voltage issues on certain Epox boards, but there are fixes for them too. The amdmb forums have a lot of info on that.