diehrd
07-03-01, 02:23 PM
I have an axia 1.2 266 fsb processor on the abit kt7a
Yesterday I trashed my alpha pal 6035 for the SK6.
Pal 6035 on my 1.2 at 1.33 temps hit 52-55c vcore 1.775
That is the highest I could oc my processor and be stable with the Pal 6035
The SK6
1.2 at 1.2 temp =45c 1.75vcore
1.2 at 1.33 and 1.775 vcore temp=45c
1.2 at 1.4 and 1.80 vcore temp =45c
1.2 at 1.43 and vcore at 1.85 temp = 45c
Above temps are at max load for 20 minutes each on the pal and SK6,current clock speed 1.43 stable.
WEIRD is no matter clock speed I get the same max temp,I dont know if it is the heat sink or my install,I tend to think this copper weight called the SK6 has a minimum absortion before she disapates the heat.
Mounting slightly easyer on the sk6,alpha pal not bad but still harder.All in all I like the SK6 and will remove her clean processor and reapply artic silver to see if that is why the temps stay at 45c.
Yesterday I trashed my alpha pal 6035 for the SK6.
Pal 6035 on my 1.2 at 1.33 temps hit 52-55c vcore 1.775
That is the highest I could oc my processor and be stable with the Pal 6035
The SK6
1.2 at 1.2 temp =45c 1.75vcore
1.2 at 1.33 and 1.775 vcore temp=45c
1.2 at 1.4 and 1.80 vcore temp =45c
1.2 at 1.43 and vcore at 1.85 temp = 45c
Above temps are at max load for 20 minutes each on the pal and SK6,current clock speed 1.43 stable.
WEIRD is no matter clock speed I get the same max temp,I dont know if it is the heat sink or my install,I tend to think this copper weight called the SK6 has a minimum absortion before she disapates the heat.
Mounting slightly easyer on the sk6,alpha pal not bad but still harder.All in all I like the SK6 and will remove her clean processor and reapply artic silver to see if that is why the temps stay at 45c.