View Full Version : Have you heard of this hsf? What do you think?
Hey guys, I'm runnig my duron 700 back down to 800 cuz my temps too high. Need some advice on this hsf.
CIDICOM
12v fan 60x60x15mm
ball bearing
4000rpm fan + 10%
29 dba
air flo 18.1 @4000rpm
I still have the factory coolermaster and @ 800mhz my temps are 42 idle....What caught my eye is that it's only 15$ and its rated to 1000mhz
What do you all think?
If you want a good deal check out Svcompucycle.com (http://www.svcompucycle.com/) I just ordered a Golden Gate with the 27 cfm fan for my brother. It should be almost as good as an SK-6 with a similar fan. If you can put up with the noise they have the Goden Gate for $19.99 with a Delta 38cfm fan.
William
07-07-01, 02:52 PM
i've never heard of it, but that is a weak fan, i don't think it would cool extremely well.
CSaddict
07-07-01, 02:55 PM
I could suggest the Millenium Glaciator to you then. The setup was like 40 bucks and it comes with arctic silver. You should look into it.
WyrmMaster
07-07-01, 11:48 PM
Rated for 1ghz really means that it will keep your chip from bursting into flames, but only on tuesdays under a full moon, otherwise good luck. I just got one of the Gladiators / Golden Gate heatsinks from svcompucycle.com, and i am happy with it. The Glaciator is also a very good heatsink, actually one of the best.
DoDFAMW4
07-08-01, 03:56 PM
i wish id seen that SVC page before i ordered my CoolerMaster =(
Frost Byte
07-09-01, 02:35 PM
WyrmMaster (Jul 07, 2001 11:48 p.m.):
Rated for 1ghz really means that it will keep your chip from bursting into flames, but only on tuesdays under a full moon, otherwise good luck. I just got one of the Gladiators / Golden Gate heatsinks from svcompucycle.com, and i am happy with it. The Glaciator is also a very good heatsink, actually one of the best.
is the Gladiator the same as the Golden Gate? and do you think it is better than this one (http://http://www.plycon.com/slvmnt.htm)?
k_lined4lyf
07-09-01, 06:27 PM
is the Gladiator the same as the Golden Gate? and do you think it is better than this one (http://http://www.plycon.com/slvmnt.htm)?
A kind link correction for the lazy. =)
http://www.plycon.com/slvmnt.htm
Btw, I first saw this HSF there a few weeks ago... I have yet to find any comments concerning it in the forums.
K-Lined4lyf
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.