PDA

View Full Version : Thermal Tape

chaos
07-10-01, 05:46 PM
Where can I get some of thid stuff-Got some ram heatsinks and plan on putting them on my geforce2 pro
UnseenMenace
07-10-01, 05:50 PM
try radioshack
Ferg
07-10-01, 05:51 PM
You would be better off using thermal adhesive. It cost more, around 15 bucks but it will work better. 2CoolTek (http://www.2cooltek.com) sells both, but I highly recommend that you go with Artic Silver thermal adhesive.
CSaddict
07-10-01, 06:25 PM
where do you get A.S. thermal adhesive? I didnt know they made it!
Ferg
07-10-01, 06:32 PM
same place, 2cooltek (http://www.2cooltek.com)
dozier768
07-10-01, 06:39 PM
i think pcnut has it for 8 or 9 bucks you can also use regular epoxy and radioshack thermal paste it would be better than frag tape. all you do is get some 5 minute epoxy and put a little on each corner of the chip and then smear some thermal paste in the middle and put your sink on and then put a little weight on it for about 30 minutes or so. its much cheaper and works very well