Peltier Thermoelectric Cooler 72 Watt

[AmbientFiction]

How well would this cool just using air I have a 633 celeron and I want to take it as high as possible without water. If I have to use water then so be it but I don't want to use water right now.
Input please

[ken257]

You have a good chance of this working if you use a good HSF with a Delta 38 or better. Although not ideal, Intel cpu's don't put out near the heat of an Athalon. Many times all you need is 5-10C better temps to get a nice OC, not everything always has to be sub-zero. It is definatly worth a shot b4 you goto water.

[cjtune]

Check for your CPU's waste heat production with Radiate (in downloads section). Then see whether it is more than 60% of the 72W TEC you have. From most manufacturer spec charts I've seen, TECs seem to have a max. heat removal of about 60% of the input power (when running at Vmax voltage). So, you'll remove a max. of 43.2W with that TEC but to be safe I'd keep a safety margin of about 20% (9W) away from the max so your CPU, at O/C speeds, should not produce more than 34.2W of heat. At these heat loads, you can actually get away without water cooling -just modify an Athlon HSF to fit.

[AmbientFiction]

Where is this Download section supposed to be at?

[ken257]

http://www.overclockers.com/topiclist/index27.asp#UTILITIES