PLz help anyone.....

[zindane18]

OK guys...heres the deal...I have an Abit Max2 with a 2200XP chip... 2 Maxtor ATA 133 Hardrives Raid. THe problem is I really want to OC this bad boy. I have great cooling and everything. Problem is, I try to OC it above 140 fsb and it locks. I thought it was my PC2100 mem...so I just bought PC3200 and everything. I have a geforce 3 ti200 and soundblaster Audigy. The only tother thing in my rig is a ati cap. card. I even tried upping the fsb to like 170 and changing the ratio to 5:2:1 but it wont boot up under any fsb with that ratio....I dont get it!!! Tried increasing some voltages...still nothing...can someone plz help me.!!

Thanks

Zindane

[Rav]

Try pulling all the PCI cards and disable all the on board stuff. Trying using 1 drive instead of RAID. Also, what size PSU do you have?

-Rav

[litghost]

its ur divider, u need to reach 166 b4 u can use the the 1/5 divider, if not ur pci bus will be too low. i have the same problem, stuck at 142, only i dont have a 1/5 divider u do. its just the pci bus is too far out of whack to work

up ur fsb to 166 and increase the divider, that shoud do it(of course u need to make it stable).
EDIT: i see u tried 170, try 166

[zindane18]

ok thanks let me give it a shot....

p.s. I have a 400 W PSU