PDA

View Full Version : PC-Chips MOBO M807


Taij
12-28-00, 08:40 AM
Does anyone know how to overclock on this MOBO. I am running a Duron 700. The CPU came unlocked. I have adjusted the FSB to112 (the maximum the bios would allow) It is running at 7x 112 for a total oc of 784. Temp stays between 36 to 39.9 c. My Cvolt is now at 1.51. I know I need to up this. I will have to use the golden bridge trick on the L7 on the chip. Before I dod this I ant to know if I can and how do I change the multiplyer on this mobo.

MiracleMan
01-02-01, 10:58 AM
I have the PC-Chips MOBO M805LM, the baby sister of the M807.
In the manual, you can see the menu for "plug&play cpu" showing all itens to modify, like voltages and multiplayers, but when u enters the bios, u only see the "dimm clock auto something" and the fsb settings (yes, only to 112mhz). I looked at mobo jumpers, and it have several un-documented. Since it have one jumper to prevent to write the bios, it could have one to enable that settings. So look for a jumper to disable this "auto configuration", or for an Abit or Asus mobo...

Cheepo
01-07-01, 03:57 PM
The manual looked to me like you could turn off auto CPU then acces these other settings multiplier voltage etc. Does this not work?

MiracleMan
01-09-01, 10:58 PM
Forget about multiplayer and voltage changes in this mobo. Oh, and it shows wrong temps readings! You must add +- 10C to the temp reading to be close to the real temp.
This isn't a overclockable mobo. Go to the Abit or Asus...