duron 1200 o/c

[Dweller]

i finally got my duron 1200 o/c to 1500 is this any good ?

[Skiing Squirrel]

Thats a pretty good overclock. 300mhz. Can you tell the difference?

[eli]

That is pretty exceptional for a duron at 1.2 ghz. Let us know your setup and how you did it.

[Dweller]

i used cpufsb and hadda hit the reset bttn bout 30 times befor i got to 1500 and yes i can tell the diff when playin unreal 2k

[[OC]This]

yes... Duron running at 1.5ghz is a very good OC.
you must have the AHLCA stepping... good good.
What's your FSB at..

[SickBoy]

1.5 GHz is about the most anyone can get from a Morgan. That's where that core tops out at. Nice job :)

[dcfan60]

GOOD job m8, what's you Vcore? I have 1.3 duron @ 1.41 with 1.75v , I have tired to get 1.42 with 1.85V but I just wont go any higher. and also I would like to know what is you cooling ?

[Vertical_Zer0]

These durons seem to hit a wall about 200 or 300 mhz over stock. Nice job with the 1.5!!!

[centered effect]

DAMN!!!! how did you hit 1500???? whats your parts??
i cant get past 1.3 stable cause of the motherboard and hard drive, i constantly keep getting bad boot sectors after i o/c


system:
AMD Duron 1.2GHZ
Alpha PAL 8045/Delta 80mm Screamer!!
MSI N-force 415D w/ 3.2 BIOS
Maxtor 80GB 5400 HDD
Quantum 30GB HDD
G-force 3 Ti-200
Enermax 351 PSU

[Dweller]

my duron is at stock voltage and my fsb is 125 and that gives me
an o/c of 1500.1 only thing i had to do to get that is set my ram to 100 instead of 133 or it wont o/c :-)

and for cooling i have a zalman alu/copper hs and as3 and that keeps my temps at 29 stock and 31 o/c idle and my load temps rarely go above 36