800t-bird, but cant fly @ gig??

[ReFuGee DaWG]

i have an 800tbird at 950 with the AZ11 mobo, and i just cant seem to get it at 1GHz, its running @ 9.5x100, when i run it at 10x100 it runs till i play counterstrike or defrag my HD...

i tried 9.5x106FSB but no stable either, i'm sure my tbird can reach the max of 1100MHz, i know that i'm missing something though...
i added a fan to my chipset and put thermal paste between the heatsink and the chip..

thank you,
ReFuGee DaWG
ULYSSES

[Eriksson]

How much cpu voltage are you using? Can you increse it? What cooling setup are you running? Cpu temps??

[Rob Cork]

My tbird 700 would never do 900, even with watercooling and 1.94V :( Granted, it was an aluminium one from Austin and an early one at that (week 23). I'm not saying you won't get a gig, i'm sure you will with better cooling / more voltage as Eriksson says, if you haven't already tried that, just that 1.1gig is a bit ambitious if getting above 950 is difficult.

[ReFuGee DaWG]

i connected all bridges.... its running 1.85 (i guess)
i bought it like in early or mid august...

i'm thinking i should underclock it to 7.5 and try running the FSB@133, that should give me 997MHz, close enought..

anyone know if it'll work??
my mobo (az11) has jumper to set it to run @133 BSF, but when i tried, it wont boot, but then i read that i need to underclock it.


peace-out,
ReFuGee DaWG

[Rob Cork]

You won't get 133 out of a KT133 board like the AZ11 - you'll need a KT133a board. I bought my tbird at the same time - yours may be unlocked, right? Being an early one it may well not overclock that well - my duron is week 25, another oldie :-) and it needs 2.2V to do the gig.

[SquareGamer]

how did you change the multiplier on the Az11. I have the same mobo but can't figure out how to change the multiplier

[AZZKICKER]

you have to solder like 50 wires on the mobo to connect to some dipswitches your self
and some other ****

its hard if you dont know what your doing