- Joined
- Feb 12, 2001
- Location
- the Netherlands
Just bought a P4-Celeron 2.0Ghz a stick of 512MB PC2700 and a DFI P4X266A mobo. I came from a SDRAM system and only had to set cas latency and precharge. Now with DDR setup I'm like "what the hell is this?" I'm listing below what my BIOS options are, the DDR will never be running faster than PC2100 so I'm looking for max. (3D)performance settings here...
DRAM clock by SPD/manual
DRAM timing by SPD/manual
SDRAM CAS latency 2/2.5
BANK interleave disable/enable
PRECHARGE to active (trp) ?
ACTIVE to precharge (tras) ?
ACTIVE to cmd (Trcd) ?
DRAM command rate ?
DRAM burst len 4/8
Thanx for any help, my next question will be about what all the AGP setting are for! LOL!
DRAM clock by SPD/manual
DRAM timing by SPD/manual
SDRAM CAS latency 2/2.5
BANK interleave disable/enable
PRECHARGE to active (trp) ?
ACTIVE to precharge (tras) ?
ACTIVE to cmd (Trcd) ?
DRAM command rate ?
DRAM burst len 4/8
Thanx for any help, my next question will be about what all the AGP setting are for! LOL!