- Joined
- Dec 9, 2002
How am I doing overclocking P4PE and P4 2.4B C1?
See sig for parts, still using stock cooling.
I have slowly raised the FSB to 4x150=600mhz, and I have set the Memory Frequency to 400 mhz. No adjustments made to voltages, all on auto.
2.4B cpu is now running at 2.70 (running 4 hours at this setting)
Running Seti or playing Serious Sam the CPU checks out at 48C, so no heat problems.
System appears stable.
Any suggestions for what to do next? (I don't understand mem timings, so I could use some productive suggestions. )
See sig for parts, still using stock cooling.
I have slowly raised the FSB to 4x150=600mhz, and I have set the Memory Frequency to 400 mhz. No adjustments made to voltages, all on auto.
2.4B cpu is now running at 2.70 (running 4 hours at this setting)
Running Seti or playing Serious Sam the CPU checks out at 48C, so no heat problems.
System appears stable.
Any suggestions for what to do next? (I don't understand mem timings, so I could use some productive suggestions. )
Last edited: