- Joined
- Apr 4, 2002
BE-7 overclocking probs..........
hey all- heres my prob-
i have a P4 1.6a and had the Asus P4T-E with 2 sticks of Samsung Original Rambus 256MB 16bit 800MHz Memory-
i was able to overclock that system to 2.2ghz
now i have the Abit BE7 with Samsung IC Chipset 512MB DDR333 PC2700 Memory-
i can only overclock this to 2.17 with it being stable- here are my bios settings
CPU OP Speed: User Define
-Ext. Clock (Cpu/Agp/Pci) 135/90/45mhz
-PCI Bus Freq. : Ext. Clock/3
-Multiplier Factor: x16
-DRAM Ratio H/W Strap : By CPU
-DRAM Ratio (CPU: Dram) : By SPD (3:4)
CPU Core voltage: Std. Vcore
Dram Volt: 2.5V
if i go any higher on my ext. clock it goes into continuous reboot-
PLEASE HELP!!! i would like to surpass my asus overclock!!
p.s. - dont look at my signiture- its not accurate
hey all- heres my prob-
i have a P4 1.6a and had the Asus P4T-E with 2 sticks of Samsung Original Rambus 256MB 16bit 800MHz Memory-
i was able to overclock that system to 2.2ghz
now i have the Abit BE7 with Samsung IC Chipset 512MB DDR333 PC2700 Memory-
i can only overclock this to 2.17 with it being stable- here are my bios settings
CPU OP Speed: User Define
-Ext. Clock (Cpu/Agp/Pci) 135/90/45mhz
-PCI Bus Freq. : Ext. Clock/3
-Multiplier Factor: x16
-DRAM Ratio H/W Strap : By CPU
-DRAM Ratio (CPU: Dram) : By SPD (3:4)
CPU Core voltage: Std. Vcore
Dram Volt: 2.5V
if i go any higher on my ext. clock it goes into continuous reboot-
PLEASE HELP!!! i would like to surpass my asus overclock!!
p.s. - dont look at my signiture- its not accurate
Last edited: