On average what overclocked speed can you expect from PC3200??

Zero470 · Feb 21, 2003

I was just wondering for those of you who have had experiece with PC3200 how high you have been able to push it, what brands they are, and what timing/voltages you were using???

Thanks! Any feedback is appreciated.

tragic_monkey · Feb 21, 2003

i depends on the brand my twinmos is currently at 4-2-2-2.0 at 205MHz and its my mobo chipset holding me back

Jon · Feb 21, 2003

I have two sticks of 256MB Corsair XMS PC3200C2 (non-Platinum) running at 220MHz 4-2-2-2.0 in an 8RDA. Took 2.9V to get it completely stable though.

pko/c · Feb 21, 2003

With my Geil DDR3200 at cas 2-3-3-6 225 Mhz.

WyrmMaster · Feb 21, 2003

Max my OCZ has gotten is 210 6-2-2-2, but i didnt pust the voltage to hard there, it will probably do more, i need to play with it some. Also, i am running 2x512mb sticks so they will probably overclock less than the 256mb sticks.

DipStickTony · Feb 21, 2003

1024 megs of hardcorecooling.com pc3200 cas 2 runs at 215 2-6-3-3 and I have no way of testing higher at the moment.

The geil I used to use ran max 215 mhz 2.9v cas 2.5-6-3-3, but it would run 2-6-3-3 up to 212 mhz.

pip · Feb 21, 2003

mushkin at 222mhz 2.7v lowest timings

Zero470 · Feb 22, 2003

Thanks guys, so far from what has been posted here I guess its safe to assume that with some voltage increase you should be able to hit speeds between 210-220 with brand name pc3200. Well i was really hoping to run 230+ so i guess PC3500 or 3700 would be a better bet. Any recommendatiions???

On average what overclocked speed can you expect from PC3200??

Zero470

Registered

tragic_monkey

Member

Jon

Just Another Retired Moderator

pko/c

Member

WyrmMaster

I'm a little teapot Senior

DipStickTony

Member

pip

Member

Zero470

Registered

Similar threads