general (more)help please!!!!!!
Hi all,
I bought this mobo a couple of months back along with pro but since ive had it the system has been pretty unstable,with reboots all over the shop plus freezing which has the sys squeeling like a pig.
what im trying to do is get what i paid for which is 133fsb-133ddr
i have tried setting the jumpers to this goal but the sys boots up with all the regular noises but no display???so i set it to 100-133 which is ok-ish it boots as normal but as recently it is even been crashing surfing the web??not normal for this sys but thats only happen'd since i installed a new ddr stick(brand name mm???256mb ddr 2100)it worked for an evening but went to surf the next evening and it froze each time, i placed only the new one in(mm)and it would display strange lines near systray then 30secs later would freeze? but worked with old one only untill i thought sod it and put both in and all seems so far ok ish again.
i will get the bois volt readings and post them in a tick.
I am not a newbie so fire away as you will.
sys
acorp 7a1647a 1.0- new flash1.3 which is done
1.1ghz duron 100fsb so far
384mgs ddr 2100(one is samsung the other as i said is called mm , im pretty sure they are both unbufferd and my board is ok with un buf but one may be buf
geforce 3 ti200 not oc(not yet)agp
soundblaster live 1024 pci
56k modem
maxtor 20gig 7200rpm
quantum fireball 1.6gigs 7200rpm i think
philips cdrw drive
liteon dvd drive
floppy
300w solarmax
6 fans total cpu idle temp 39 sys temp idle 28
atx format
thanks all
billy9x
vdd(v)5.18v
vin1(v)3.36v
vin2(v)3.02v
vin3(v)1.76v
any idea anyone if these (v) look ok??????
any good fsb changing software out there as i think i unlocked the pro's multi but im abit dubious about cutting any more bridges
but DO want more belt to my sys ive oc graphics and other boards but this is the first ghz pro ive had any help please!!!
Hi all,
I bought this mobo a couple of months back along with pro but since ive had it the system has been pretty unstable,with reboots all over the shop plus freezing which has the sys squeeling like a pig.
what im trying to do is get what i paid for which is 133fsb-133ddr
i have tried setting the jumpers to this goal but the sys boots up with all the regular noises but no display???so i set it to 100-133 which is ok-ish it boots as normal but as recently it is even been crashing surfing the web??not normal for this sys but thats only happen'd since i installed a new ddr stick(brand name mm???256mb ddr 2100)it worked for an evening but went to surf the next evening and it froze each time, i placed only the new one in(mm)and it would display strange lines near systray then 30secs later would freeze? but worked with old one only untill i thought sod it and put both in and all seems so far ok ish again.
i will get the bois volt readings and post them in a tick.
I am not a newbie so fire away as you will.
sys
acorp 7a1647a 1.0- new flash1.3 which is done
1.1ghz duron 100fsb so far
384mgs ddr 2100(one is samsung the other as i said is called mm , im pretty sure they are both unbufferd and my board is ok with un buf but one may be buf
geforce 3 ti200 not oc(not yet)agp
soundblaster live 1024 pci
56k modem
maxtor 20gig 7200rpm
quantum fireball 1.6gigs 7200rpm i think
philips cdrw drive
liteon dvd drive
floppy
300w solarmax
6 fans total cpu idle temp 39 sys temp idle 28
atx format
thanks all
billy9x
vdd(v)5.18v
vin1(v)3.36v
vin2(v)3.02v
vin3(v)1.76v
any idea anyone if these (v) look ok??????
any good fsb changing software out there as i think i unlocked the pro's multi but im abit dubious about cutting any more bridges
but DO want more belt to my sys ive oc graphics and other boards but this is the first ghz pro ive had any help please!!!
Last edited: