- Joined
- Mar 1, 2003
the instructions are not very clear. I wonder if there is anyone knows bios settings well?
essential components:
Athlon XP 1700+ T-Bred B
Abit NF7-S v1.2
Crucial 9700 pro 128M
OCZ DDR3500 EL 256Mx2
Seagate 80GB 7200rpm
16x DVD/44x CD-RW
I don't know why I can't set Ram at 5-2-2-2 but 3-3-2-2 runs perfect. what if I set Voltage higher, will it be helpfull? and which voltage should be set up higher?
Memory Timing:
Row-active delay (1~15) currently 3
RAS-to-CAS delay (1~7) currently 3
Row-precharge delay (1~7) currently 2
CAS latency Time (2.0~3.0) currently 2
CPU Core Voltage: 1.1v~2.3v currently1.9
DDR SDRAM Voltage: 2.6v~2.9v currently 2.6v
Chipset Voltage: 1.4v~1.7v currently1.5v
AGP Voltage: 1.5v~1.8v currently1.5v
CPU FSB/DRAM ratio (3/3~6/6) is there any differences between 3/3 and 6/6?
CPU Interface : Enable/Disable which one I should choose?
APIC Mode: Enable/Disable -MPS Version Ctrl For OS 1.1/1.4 I don't think it's easy to overclock if I disable this option. (I tried several times)
Report No FDD For OS Enable/Disable what is FDD, enable it or not?
Delay IDE Initial (0~15 seconds) Have I got a nice Hard drive?
System BIOS Cacheable Enable/Disable should I disable this ****?
Video RAM Cacheable same as above
AGP Aperture Size (32~512M) I'm using 9700 pro 128M then 256M aperture size could be the best choice?
FSB spread Spectrum (Disable/0.5%/1%/) currently 0.5% I hate this option cuz I don't understand this ****.
AGP spread Spectrum (Disable/0.5%) currently 0.5% hope some one can tell me
CPU Thermal-Throttling (Disable/87.5%/75%/62.5%/50%/37.5%/25%/12.5%) currently 50%
Onchip IDE controller 1/2:
-Master Drive PIO Mode: (Auto, mode0/1/2/3/4) currently Auto
-Slave.........same as above
-Master Drive Ultra DMA (Auto/Disable) Auto
-Slave........same as above
does my harddrive ATA100 support Ultra DMA?
IDE Prefetch Mode (Disable/Enable) currently Enable, I shall..............?
onboard Parallel port (Disable, 378/IRQ, 278/IRQ, 3BC/IRQ) currently 378/IRQ No idea of what it be
Parallel port Mode: (SPP/EPP/ECP/ECP+EPP) currently ECP+EPP
essential components:
Athlon XP 1700+ T-Bred B
Abit NF7-S v1.2
Crucial 9700 pro 128M
OCZ DDR3500 EL 256Mx2
Seagate 80GB 7200rpm
16x DVD/44x CD-RW
I don't know why I can't set Ram at 5-2-2-2 but 3-3-2-2 runs perfect. what if I set Voltage higher, will it be helpfull? and which voltage should be set up higher?
Memory Timing:
Row-active delay (1~15) currently 3
RAS-to-CAS delay (1~7) currently 3
Row-precharge delay (1~7) currently 2
CAS latency Time (2.0~3.0) currently 2
CPU Core Voltage: 1.1v~2.3v currently1.9
DDR SDRAM Voltage: 2.6v~2.9v currently 2.6v
Chipset Voltage: 1.4v~1.7v currently1.5v
AGP Voltage: 1.5v~1.8v currently1.5v
CPU FSB/DRAM ratio (3/3~6/6) is there any differences between 3/3 and 6/6?
CPU Interface : Enable/Disable which one I should choose?
APIC Mode: Enable/Disable -MPS Version Ctrl For OS 1.1/1.4 I don't think it's easy to overclock if I disable this option. (I tried several times)
Report No FDD For OS Enable/Disable what is FDD, enable it or not?
Delay IDE Initial (0~15 seconds) Have I got a nice Hard drive?
System BIOS Cacheable Enable/Disable should I disable this ****?
Video RAM Cacheable same as above
AGP Aperture Size (32~512M) I'm using 9700 pro 128M then 256M aperture size could be the best choice?
FSB spread Spectrum (Disable/0.5%/1%/) currently 0.5% I hate this option cuz I don't understand this ****.
AGP spread Spectrum (Disable/0.5%) currently 0.5% hope some one can tell me
CPU Thermal-Throttling (Disable/87.5%/75%/62.5%/50%/37.5%/25%/12.5%) currently 50%
Onchip IDE controller 1/2:
-Master Drive PIO Mode: (Auto, mode0/1/2/3/4) currently Auto
-Slave.........same as above
-Master Drive Ultra DMA (Auto/Disable) Auto
-Slave........same as above
does my harddrive ATA100 support Ultra DMA?
IDE Prefetch Mode (Disable/Enable) currently Enable, I shall..............?
onboard Parallel port (Disable, 378/IRQ, 278/IRQ, 3BC/IRQ) currently 378/IRQ No idea of what it be
Parallel port Mode: (SPP/EPP/ECP/ECP+EPP) currently ECP+EPP