I need SetFSB for 4PEA+ can anyone help?

Ive looked all over the web for the 4PEA+ SETFSB program
I know the one thats made for that gigabyte board worx with the 4pea+ but I dont know the name of the giga board.

If anyone could post me a link for it...THANKS

SetFSB

SetFSB is FREEWARE.
Use SetFSB.EXE at YOUR OWN RISK.

SetFSB(s) can be downloaded from here.
Japanese(latest) http://www.page.sannet.ne.jp/k-hazama/setfsb/setfsb.htm
English(latest) http://www.page.sannet.ne.jp/k-hazama/setfsb/info.htm

Notes

1.GIVEIO.SYS
IF you use SetFSB by WindowsNT4/2000/XP,
You must put "GIVEIO.SYS" in your SetFSB dir.
GIVEIO can be received from here.

http://www.ddj.com/ftp/1996/1996.05/directio.zip

2.Command Line options
-w[00-99] : Wait [sec] default=10sec
-s[000-999] : Set FSB [MHz]
-m[0-9] : Mode 0=normal(default) , 1=ultra
-i[00-99] : Increment [MHz] default=max
-a[0-1] : ASUS�@0=none , 1=ASUS

I have a shortcut in my startup folder that looks like the following:

Example : Wait=5sec, Mode=(0:default), Set FSB=150MHz, Increment=5MHz
"C:\Program Files\setfsbU14e_8iexp\SetFSBu_8IEXP.exe" -w05 -s150 -i05

3.The PCI speed of "SetFSB for GA-8IEXP"
The datasheet of P4PE's clockgen(ICS950224AF) is not exhibited to the site of ICS yet.
SetFSB can be setting FSB even if there is no data sheet,
but it can not understand PCI divider (especially Fix Rate).
This problem will be corrected when the datasheet is exhibited.
I think that PCI of bios is right.

Thanks-abo333

THANKS a ton man!

This is a great little program, finally allowed me to o'c an OEM HP mobo based on the P4B266. Now, if there existed a proggy that would let me fix the AGP/PCI bus speed, and another which would let me select voltages, I'd be all set.