FSB on FIC AZ-11 w/ Duron 600

[encountr]

Hi!

My config:
FIC AZ-11 mobo w/ KT133 chipset
128M PC133 mem (2x 64M)
10.2G Maxtor 7200RPM
Asus V3800 TnT2 Pro AGP4X
Aureal Vortex2 SQ2500 SuperQuad

each time i try to raise the FSB the PC freeze...I tryed w/ SoftFSb and the Clockometer from FIC web site (for FIC board only)...did not work at all...

I know the PCI speed thing and it should work...

Does anyone seen that before? HELP!

Tks!

[MAIA]

Hi!
===============
AMD K7 duron 700@742 (7x106)
FIC AZ11....,nah! ASUS A7Pro (KT133)--- 2 Days left to get it
256Mb Ram pc100 cas2
1xHD WD udma66 7200 15.5Gb
1xHD Seagate udma66 5400 10.5Gb
48X Philips CDROM udma 33
PCI 128
17" Samsung mon.
Win ME + DX8 + VIA .26 + agp404 + 7041 WHQL
Radeon 32Mb DDR 180/180 4xAGP SideB enable

Yeaph! i'm buying an ASUS A7Pro and getting rid of the AZ11. In my case the AZ11 is very stable. I advice you to have:
a) 300W PS
b) Good case ventilation
c) A fan (a Pentium or 486 fan will do) above VIA Northbridge chip heatsink.

Cheers,
MAIA

[encountr]

Yes the FIC AZ-11 is VERY stable...I just cant get a higher FSB to work!!

Damn!

There is a setting in the BIOS but it wont boot!

[MAIA]

Try:
1- Setting your CAS to 3
2- If it didn't help, try setting you RAM clock to HostCLK wich will drive you to 100Mhz (or overclocked FSB you set) and set CAS to 2.
I tried 108Mhz FSB but it didn't work, locked while playing UT, 106Mhz FSB is fine to me Only testing will tell you wich is faster&more stable.

Cheers,
MAIA