TC-4 and maze thickness

[DeathONator]

I am going to buy either the TC-4 mounting hardware, or the Maze hardware for my almost done waterblock. My block is on the thick side so I want to make sure the springs are short enough, or the rods are long enough for me to get the screws on w/ out too much struggling.

So anyways if you know the thickness of the TC-4 or Maze2 please post.

Thanks...

Oh and if you have the time and knowledge, it would be great if I knew the legth of the rods and uncompressed springs for each mounting kit.

[Chief_Wiggum]

Well, I tried to get my calipers into my case, but no go :(

But with the plastic ruler looks like my TC4 is 22mm high.

The bolts included with the kit extend 60mm high from the top of the mb, so they're actually a little longer. Screwed all the way down there's about 8mm of thread left.

That's the best I can do for you without removing the block.

[JFettig]

Im sure the block is .75" thick, and the bolts are 2.5" not 100% sure though.


Jon

[DeathONator]

Thanks alot guys! You are now my new heros for the week! :p