PDA

View Full Version : 2.6ghz 800FSB and IC7-G O/C Results

JuniorESQ
05-07-03, 12:26 PM
http://members.aol.com/junioresq/images/cpu.jpg

http://members.aol.com/junioresq/images/computer.jpg

http://members.aol.com/junioresq/images/cpu-z.jpg http://members.aol.com/junioresq/images/cpu-z memory.jpg

Not bad, but not great either. Using 1.1 Bios.

I just read over at HardOCP that they only got their 2.4 to 3.5 but on watercooling at 1.7v. I'm running at default between 1.488 and 1.5v.

No matter how much more voltage I give it, it won't run any higher. I've tried as high as 1.7v, but it won't hold Windows at 257mhz FSB. It pretty much hits the brick wall at 256mhz FSB.

I'm not sure if its the motherboard or really the CPU. I tried SoftFSB and got it stable at 256mhz FSB, but not at 257mhz.

I'm content for now.
JuniorESQ
05-07-03, 12:27 PM
http://members.aol.com/junioresq/images/sandra cpu bench.jpg http://members.aol.com/junioresq/images/sandra cpu mm bench.jpghttp://members.aol.com/junioresq/images/sandra memory bench.jpg
JeffPH
05-07-03, 01:49 PM
nice
jdmcnudgent
05-07-03, 02:18 PM
sweet.:D
Lonely Raven
05-07-03, 03:45 PM
I think I need to get me a real overclocking P4 motherboard.
This DFI LAN Party looks killer, has lots of features, but doesn't
overclock for beans.

I'm hoping the BIOS that the R&D promised me will have some
overclocking features, otherwise this thing is going back!

Good overclock man! I can't wait to get me an 800FSB
krag
05-07-03, 03:58 PM
Sweet bro! So...you got your pc3500 to run at 255mhz? Wow! Very nice...I assume that it is at 1:1 on the cpu/mem ratio?
JuniorESQ
05-07-03, 04:32 PM
Krag,

Look at the CPU-Z memory score.

It's 408 mhz at 2-3-3-5 @ 2.6v

5:4 ratio is used.

This highest I could get this memory to run was 460mhz @ 2.8v 2-3-3-6 settings.

I'm still not sure if I'm happy or disappointed.
pacino
05-07-03, 05:41 PM
Originally posted by JuniorESQ
I'm still not sure if I'm happy or disappointed.

I say disappointed LOL! j/k .. dude, this is nice :D
jdmcnudgent
05-07-03, 06:00 PM
Originally posted by pacino


I say disappointed LOL! j/k .. dude, this is nice :D where you been bro??
Rasputin'sLiver
05-07-03, 06:04 PM
Originally posted by jdmcnudgent
where you been bro??

i asked him that in another thread but we should have figured that canterwood would smoke pacino out of his hiding place! lol.:D
Ununquadium114
05-07-03, 06:29 PM
Where'd you get it?
Kunal
05-07-03, 08:20 PM
Great OC :) I'm split minded between a 2.4 and 2.6 right now.

If ya don't mind me asking, where'd ya get your PC3500 CH-5 sticks from? I've only found em is here (http://www.hardcorecooling.us/product.asp?0=200&1=201&3=407). Apparently these 0.13micron chips can clock quite far - comfortable at the 250/500 mark :)
JuniorESQ
05-07-03, 08:43 PM
Ununquadium114

I got the CPU from computerclubhouse.com. It looks like they still have 4 - 2.4's 800 in stock and 1 - 2.8 800 in stock. No 2.6s.
Toscani
05-07-03, 09:12 PM
Can you run some benchies with a 1:1 ratio? (as high as you can get it) I want to find out the difference between sync and async, so I can decide on a CPU. Thanks.
pacino
05-08-03, 01:07 AM
Originally posted by jdmcnudgent
where you been bro??

Got a new job in Asia, been without my stuff for almost 2 months :( .. nice to see you guys again :)
JeffPH
05-08-03, 01:10 AM
bro temp readings at load and idle please and voltage fluctuations on vcore and 12v, 5v rail?

thanks
jdmcnudgent
05-08-03, 01:11 AM
Originally posted by pacino


Got a new job in Asia, been without my stuff for almost 2 months :( .. nice to see you guys again :) wow bro, so your in asia now, and not canada??:p
pacino
05-08-03, 01:19 AM
Originally posted by Rasputin'sLiver


i asked him that in another thread but we should have figured that canterwood would smoke pacino out of his hiding place! lol.:D

ROFLLLLLLLLL!!! .. I'm closer to Malaysia now Rasie, canterwood babies are waving :p
pacino
05-08-03, 01:22 AM
Originally posted by jdmcnudgent
wow bro, so your in asia now, and not canada??:p

Correct.. It was a job transfer, I like it, it's warmer here hehe
krag
05-08-03, 01:27 AM
Originally posted by pacino


Correct.. It was a job transfer, I like it, it's warmer here hehe

Look what the cat dragged in!!!
(background music "The boys are back in town") he he!

Welp brudda what kind a rig is this new job gonna buy ya?;)
pacino
05-08-03, 01:41 AM
Kraggy!!! you MADE ITTTTTTTTTT!! hehehe, Congrats :) .. I don't know yet Krag, the world is moving too fast ;) , But it'll be something SWEEEEEEEEEEET .. Sorry JuniorESQ for bashing your thread :)
krag
05-08-03, 01:57 AM
Originally posted by pacino
Kraggy!!! you MADE ITTTTTTTTTT!! hehehe, Congrats :) .. I don't know yet Krag, the world is moving too fast ;) , But it'll be something SWEEEEEEEEEEET .. Sorry JuniorESQ for bashing your thread :)

Yeah bro! I am just lovin' this new rig! I am really liking my Raptor Raid action as well! Nice...nice! About time I had some OC goodness!!!!:D