800Mhz Duron with ABIT KT7 RAID

[woga]

Now, i wanan overclock the 800MHz with the ABIT KT7 RAID, what should i be able to get up to if i also have very good cooling. Do i have to do anything with L1 bridges also.

[A-Bomb]

I just did that with no luck over 800, so like they say//// it's just the luck of the draw, it's not a fantacy. I nuked the stability of my chip with an 80W peltier. I recommend, if using the peltier/watercooling method to have a copper spacer in-between the chip core and the peltier. Otherwise thease HOT amd chips might overload your peltier-- like it did mine @84c. Careful with that voltage too. This seems to be my best idea, but as it turned out/// was my worst. So careful, careful careful.

A-Bomb

[AZZKICKER]

thats right

if your going to run a peltier i would go to Tom Leufkins and order from him because he tests the best combonations for what you want

http://www.leufkentechnologies.com/

GO WITH A 85 WATT peltier at least

i think im going to try his ALPHA/85 watt peltier combo on my t brid

[Bender]

I would say 900-1000 is entirely possible if you use 1.85v and have good cooling. As for the L1 bridges you should connect each one using a mechanical pencil or conductive paint. My 600 is stable at 1010 but some durons are duds and hardly overclock at all. I guess it's just the luck of the draw. I hope you get a gig!