pencial trick help

[fireball_87]

I connedted all the l1 bridges, but nothing worked. i tried up to a 9.5x multplier, but it still posted as a duron 700 (on abit kt7-raid) I am now at 7x107(749) plez help!

[thelmores]

make sure your pencil has high graphite(#2 pencil doesnt work well).
recommend 5h.

better idea is defrost land repair kit, which can be found at most auto stores (made by permatex). got mine at autozone. its basically conductive paint, and will give your L1 jumpers a more permanent state.

if you do use a good pencil, make sure to get plenty of graphite between the jumpers, and dont short them, as this will give you erroneous settings of cpu speed, or not boot at all. erase old marks and try again.

word of caution...be careful not to crush/crack your processor core while installing/uninstalling heatsink/fan.

good luck!

[kat]

pencil trick doesn't always work and if it does it wont always stay working the best way to connect the bridges is a conductive pen do not connect the bridges from left to right up and down two at a time look at this web site for a conductive pen
http://www.web-tronics.com/