PDA

View Full Version : Is this a normal idle temp for a 2.4B?

RideGuy
05-14-03, 04:25 PM
From the bios, CPU 47, MB 32. Stock cooling.


Ride
AZN
05-14-03, 04:40 PM
sounds right if ur chip is OCed and u got a stock cooler. but i would look at the asus hardware monitor not the bios
RideGuy
05-14-03, 04:54 PM
There is no OC, and I'm just installing windows. I'll let you know when I'm in.

Thanks,
Ride
jszent
05-14-03, 09:20 PM
Ride
no ocing? temps look alittle high to me.
RideGuy
05-15-03, 11:54 AM
Originally posted by jszent
Ride
no ocing? temps look alittle high to me.


It showed 44 on the Probe last night, and now shows 42 this morning. Isn't 42 still high? I'm guessing as the AS3 sets I will see the temp go down a little more.



Ride
asw7576
05-15-03, 02:03 PM
RideGuy... yours is okay coz mine is 47C - 55C max.

mine: P4 2.4B @ 2.93GHz @ 1.525V
Z_oc
05-15-03, 02:53 PM
Idle temps at 40-45 should be OK.

Check the full load temps running Prime95 or CPU Burn.

What mobo are you using?
RideGuy
05-15-03, 04:08 PM
I am using the MSI 865PEN2-LS. Right now I have the 2.4B in it, but I will be doing a chip swap where I will end up with a 2.4C. I can't wait till I have an 800fsb! :D

The 1.6A@2.4 in my cig runs idle at 35-37(or lower depending on room temp). That's why I was conserned by the higher temps of the 2.4B. Maybe the case needs a bit more ventilation.

Thanks to everone for quick responces. I'm feeling much be.


Ride