Duron 700Mhz MSI K7T Pro-2-A

[mxpx2000]

I can't get more than 900mhz with my Duron. I tried 1GHz with 1.85core and 3.45 vio and my computers doesn't stopp beeping. I then have to clear my bios. Do you know a winning combination to get my Duron to 1Ghz. By the way i am using my retail Duron fan which turns at 5900rpm. Do i have to change my fan to get 1 GHz. Anyways i'm waiting for your answer. Thx in advance.

[BlackOut]

I've got the exact same board and processor..
I can get it to 900MHz (1,9Vcore & 3.45 VIO) but then windows won't start..

Try only closing the first 3 brides at L1!!!

[AZZKICKER]

try 3.5+ voltas on the I/O voltage

[KCM]

I have the same Mainboard and the same Problem.
I only can get 950 Mhz and when I turn the computer off it only boots posting 550Mhz.

[Tachyon]

Here is the results I have from testing the 2A.

Duron750 w/Chrome Orb
Highest stable speed - 850

Duron 750 w/Super Orb
Highest stable speed - 918

Duron 750 w/Alpha 6035 & Sanyo Denki Fan
Highest stable speed - 954

Duron 650 w/Super Orb is stable @ 900, beeps at 950 and just sits there at 1000

Duron 650 w/Alpha and Sanyo Denki posts at 950 and 1000 but locks up during Windoze boot.

I will be testing the Alpha with a YS Tech fan early next week.

My results so far seem to indicate that you aren't getting enough cooling. What HSF are you folks using?

In each case I started with vCore @ 1.85 and lowered it after I found the max speed.

[Tachyon]

The 750 beeps at 950 with all HSF setups. I may have hit the max clock multiplier for this chip.

[AZZKICKER]

are you useing a pencile to connect the L1?S

if so go to the local auto parts store and a rear window defroster repair kit and use the conductive paint in it

apply it with a tooth pick

took my 850 t bird from 1035 to 1090

helps stabblity ALOT !!

A7V T Bird 950 @ 1311mhz

[Tachyon]

I use only conductive ink.

[Tachyon]

I use only conductive ink.