I CAN'T OC!!! HELP!!!

[Umminkug]

i have a AMD T-bird 750 and i can't OC.
i have a MSI K7T Pro2-A.
my D-led says there is something wrong or checking the IDE components.

i closed all L1 bridges and i still can't change m-clock on CMOS.

HELP!!!

[Tachyon]

Did it work before you tried to overclock?

I have been testing the 2A pretty hard for a few weeks. I'm interrested in how things work out for you

[Umminkug]

i can't OC.
i can whether boot up with 750 or i can't boot up cause of that ide error.
m-clock was set for 8X after i do the pencil thing.
even i set m-clock for default, i can't boot up 50%(IDE error) with L1 bridge closed.

[Tachyon]

Can you give me all of your components and tell me what color the LED's are when the boot cycle quits?

[Wega!]

Have you done the pincil trick more than one time? If not try it again. I did it 3 times before i got it right....

[Rob Cork]

Took me six attempts. I find it helps to run a craft knife blade between the pencil marks, even when they don't look like touching, to avoid cross-bridging.

[AZZKICKER]

Rob

i see you have screwed up the voltage mod

do you have icq
i can help yea bro

[Rob Cork]

I've put a post up in AMD mobos about the failed volt mod Azz - I figure it might be good for anyone else considering the mod to read (don't wanna put them off too much though just cos I can't solder ;-) ). I've got icq, see the flower <====

[Umminkug]

ok here is what i get.
0011"initializing Hard drive controller this will initialize IDE drive and controller"
50% i get this or
the mobo boots up the comp with 750mhz clock.
m-clock is set for 8X solid.
and i tried to put up voltage too...
i tried that pencil thing for...
5times...
i also tried . III: and . IIII

SO !!! HELP!!!!!!!!!!!!!

[Rob Cork]

Ok, I think we can rule out the L1's as the problem. Have you installed all the drivers that came with your mobo? Like the VIA 4 in1's etc.? Check in device manager to see whether there's anything wrong with your IDE controller.

[Tachyon]

What HD do you have? Is the HD cable plugged into the blue socket on the MB?