i O/Ced MY T-BIRD ON THE AZ11 !!!!!

[ReFuGee DaWG]

ok... i got it to work!!!
i did this.. www.overclockers.com/tips158/

what i had to do for it to o/c though was close ALL cut bridges, ALL of 'em......

oh, BTW
800MHz tbird now at 950MHz
1.85v
300watt ps


peace-out,
ReFuGee DaWG
ULYSSES
ulysses@stealth-media.com

[Newguy123]

Hey ReFuGee DaWG

Whats your Multiplyers set at? 8.5x or 9.0 or 9.5?
And also whats your FSB at?

I have a Tbird800 the highest i can get muliplyers is 8.5 and then jack up the FSB to 110 that gets me to 937 not tooo stable but its okay. any suggestions on how i can hit 950 maybe even 1000?

Thanks

[Mykex]

Thats odd connecting all the bridges but I do not doubt you. I did a hard mod on my DFI AK74-SC/Tbird750 and my connections should have given me 1Gig but when it powered up I got 800. I am really wondering if you may have got the same result if you set them as 1Gig. My big question is if you just do any strange combination do you end up with some sort of core default? I will take it out once more tomorrow and connect the bridges in the same configuration but using a rearwindow defrost repair instead of the pencil.

[kat]

Mykex (Jan 13, 2001 05:38 a.m.):
Thats odd connecting all the bridges but I do not doubt you. I did a hard mod on my DFI AK74-SC/Tbird750 and my connections should have given me 1Gig but when it powered up I got 800. I am really wondering if you may have got the same result if you set them as 1Gig. My big question is if you just do any strange combination do you end up with some sort of core default? I will take it out once more tomorrow and connect the bridges in the same configuration but using a rearwindow defrost repair instead of the pencil.

how much is that repair kit i payed 12.95 for my conductive pen

[ReFuGee DaWG]

9.5 @100 = 950
i used a $1.87 four pack of mechanicle pencils from walmart then connected every bridge... like this |||| |||| and so on.. NOT like this //// \/\/\ or anything like that.....

what i'm guessing is that the tbirds have a different bridging architecture than the durons that everyone's always poting about...

and since i'm too lazy to resolder the dipswitches on my az11, i did it as if it have jumpers and just soldered the the "twelve points" in the way for it to think it was set to 9.5 ii!i some thing like that....

i'm willing to help anyone who wants to do htis on their AZ11...

ps.. i'd like to throw a shout out to
Bobetski
and
www.overclockers.com/tips158/




peace-out,
ReFuGee DaWG
ULYSSES

[AZZKICKER]

good job Dawg

[ReFuGee DaWG]

thnx,......

what i meant by the dipswitch thing was that i DID solder dipswitches on it, but it didnt work (never thought to connect all bridges) so it took 2 hours to take them off... but i left the dips on for the section of the fids
..........


Peace-Out,
ReFuGee DaWG

[AZZKICKER]

oh no

heeheee

so you had to go a long way to get where you are

but the question is did you learn anything through all this?

[ReFuGee DaWG]

yeah...

when you're about to give up.... try @least 1 more time.....

and if all else fails.... let me have you computer and go buy your self a mac :P

peace-out,
ReFuGee DaWG

[Newguy123]

Hello

I have a 800tbird i only connected the L1 with .5 lead pencil. I was wondering what does it do to connected all the cut lins?? on the Tbird?

And when you mean Connect all of the ones that are cut that means even the L3 and L4 and L7 just pretty much everything you see that is cut connect it.? What does this do? By connecting all the cut lines.?

Will this help me get past 935 on my Tbird 800?

Thanks

[AZZKICKER]

what board you have?

[Newguy123]

Hello

I have a Asus A7V

[ReFuGee DaWG]

ok.. i dont know about your Asus A7V, i did my o/c on an AZ11 mobo..

but yeah, i connected ALL cut bridges, i do mean ALL L3, L4, L6, L7 (any i left out?? connect them too1)



peace-out,
ReFuGee DaWG

[Mykex]

Uhh Ok I'm confused .... You have dipswitches soldered in for L6/L3/L4 (fid's)and connected all the bridges refers to the "golden" bridges?

Or did you solder in the switches but did not use them. Instead using the pencil on all of the L6/L3/L4 bridges?

As for the durons and tbird having a different configuration,my question on that would be... Then wouldn't an AV7 have to have 2 sets of instructions for the dipswitches? One for the duron and one for the tbird?

If there is some question to the configuration of the tbirds I may be in for a huge guessing game. In that case I might be better off just staying happy with my little 50mhz OC on the multi that I have. That and the FSB push has me with a 750@840 which is not all that bad considering the sheer luck involved in getting there.

Cost of the kit .... don't know was on my way out and decided to check this thread. I'll post back but I have heard they are 7-8$ if they are more than 12$ Ill get a conductive pen instead.

[Mykex]

Ok read the responce you connected everything ... and I mean everything! LOL

Good god do I have alot of questions in my head now.

[ReFuGee DaWG]

i only have dipswitches for the fids (0,1,2,3)
an i "jumped" the multiplier


hope this helps

peace-out,
ReFuGee DaWG