can't get duron 700 passed 782

[fireball_87]

i tried the pencial trick, but no luck. i have to get up the guts to take the hs/f off agan. it wont even poast at 866 (119x7) and anything higher than 800 the BIOS lock's up! random lockup's above 782 (7x112 (110 everything, +2 privet cpu buss) pleez help!

ps:anything above 700 q3 is all graphly screwed up. no amount of voltage seams to help, im currlenty at 1.75v alouth the bios "system health" section says1.801v

abit kt7-raid, duron 700@782, creative anlighter2 mx @220,370.

[Tachyon]

From what you've said, it sounds like yo're trying to clock via the FSB only. Try setting the FSB to 100 and changing the CPU clock multiplier.

[Rob Cork]

112MHz fsb is pretty damn high for a KT133 board, like the KT7-RAID. You will not get any higher, whatever you do, without changing the multiplier. Sharpen the pencil really carefully, to get a very fine point, and run it over the bridges a few times to get a good covering of graphite. Then run the blade of a craft knife between the pencil marks to ensure no cross-bridging - I tried 5 times to get it to work, and on the sixth I used the knife, and it worked! Just keep trying, don't let AMD beat you ;-)

[fireball_87]

i just tried the pencial trick agan to no avail. i am now running at 791 (107+5=112, but the cpu think's it's 113)

[ElectricMan]

I would use a lead pencil with a 0.5mm lead , I have used my to do 4 chips and it worked on the first try . I got mine from walmart it is a Zebra pencil 0.5 mm 2/99 cents. I tryed a regular #2 pencil (yellow) and it would'nt work at all for !