PDA

View Full Version : Duron 650, Can't Overclock!!


buggs
01-19-01, 09:59 PM
Ok, well I am back up. Received the new A7V today and put it all together. Its was nice to see everything go up and in sync with no problems. But, I can't seem to get this 650 past 700. I have unlocked with rear defogger material from Autozone. Did it 3 times. No bridges are touching. So my question is,Is it my bios settings or Hsf? My HSF is a cooler master DP5-6H51. Bios says temps are MB 30c and CPU 41c @ idle. If I try to go higher I get black screen and have to power down. Ram is pc100, voodoo5 agp,300watt p/s. In jumper free mode. Any possible fix?
thanks
buggs

buggs
01-20-01, 01:39 AM
O.K.,Well changed to manual mode, currently running 950mhz off this 650. Was able to post over a gig but it was a no go into win98se. Will be looking at some good pc133 and better HSF real soon. Hope will sove problem.
buggs

proze
01-20-01, 01:47 AM
glad you got the overclock! nice 'n' quick, hey? the ram and hsf will help. i'm sure you'll get your gig. :)

AfterDark
01-20-01, 03:28 AM
Hey nice to get it.
My Duron 650 runs at 1169 stable!
Vcore 1.85
I've got 2 Fans mounted on top of eachother
.Temp cpu 55,mobo31.
233 Watts!!!!!!!!!!!!!!!!!!
Cool is it