Need more voltage on new msi board

[dawg]

I have the new msi k7t pro 2-a mobo and it only goes up to 1.8 volts. my duran 700 will go up to 1026 @1.8 but wont even go past 850 @1.75. I'm sure with like 1.9 or 2 volts I could do much better. Now will voltage help with fsb as well cause I can't get over 107fsb even with good pc133.

[tfcw]

Mhm strange.
I got the same mobo with bios ver. 2.2 and i can go up to 1.85V in the bios !
I do have a T'bird 750 running at 980Mhz , not a Duron but i doubt that it has anything to do with it...
Check your Bios version.
Concerning the FSB : BE GLAD !!! I cannot go over 103Mhz FSB with PC133Mhz RAM....everything over 100Mhz is a Bonus...so... ;-)))

Greet'z

[Omron]

It's not just only the vCORE, the vI/O is also important when doing o/cking, especially when ram is running @140+ mhz, gfx-card draw too much current or you use more than 3 dimm slot, though that all motherboard required more than 3.5vI/O, but some do need more than 3.5vI/O.

The K7T Pro2-A max vI/O only 3.45v, that' s way too low as compare to some other KT133 chipset motherboard, hopefully MSI will come out a bios that can go above 3.5vI/O.

BTY, does anyone here knows any site that show modification of "vI/O to increase more than 3.45v" for MSI K7T Pro2-A motherboard.;D

TIA,

Omron.