P4C800 owners.

Just curious to see what stable clock everyone with the board is getting. Can you list what CPU, Memory&timeings, what kinda kooling your getting along with what multiplier and fsb. Thanks.

CPU 2.8c
Memory OCZ Gold Dual Channel 2-3-3-7
overclock: 3.472 14x248
1:1 memory ratio
Water cooled
vcore: default
27c idle 29c load
vdim voltage 2.7

PLEASE only list what you run your computer @ NO b.s. just window boot clock speeds.

CPU: 2.53B
Memory: 512mb Corsair PC3500 XMS PT Single Channel 2-3-3-6
Overclock: 3001.6 Mhz ( 19x158 )
CPU Voltage Idle: 1.55
CPU Voltage Load: 1.44
Memory Ratio: 4:5 ( 394.9 Mhz )
Air Cooled: Vantec Aeroflow Cooler TMD @ 5672 RPM
Temps Idle: CPU - 29c | MB - 29c

CPU 2.4C
Memory OCZ 3700 GOLD dual channel 2-3-3-6
OC 3.18 (12x265)
ilde 1.63
load 1.53
memory ratio 5:4
air cooled SLK900U & papst 92
temps ilde 33º/ full 46º

CPU: 3.00C
Memory: Corsair XMS TWINX1024-3200LL Dual Channel 2-3-3-6
Overclock: 3.30 Mhz (15x220)
CPU Voltage: 1.55
Memory Voltage: 2.85
Memory Ratio: 1:1 (440 Mhz)
Air Cooled: Zalman CNPS7000-AlCu
CPU Temps: Ilde 35º/ Full 51º

3.0C @ 235X15
Koolance Exos
corsair 3200 1:1 @ 2336 2.9 volts.

CPU: 2.4C
Memory: Corsair XMS 3500 Dual Channel 2.5-3-3-7
Overclock: 3.24Mhz (270mhz)
CPU Voltage: 1.55
Memory Voltage: 2.85
Memory Ratio: 5:4 (432 Mhz)
Koolance Case
CPU Temps: Ilde 29º/ Full 36º

CPU: 2.4C
Memory: Buffalo 2x512 PC3700 Dual Channel 2-2-2-6
Overclock: 3.2 (267mhz)
CPU Voltage 1.55
Memory Voltage 2.85
Memory Ratio 5/4
All Stock Cooling Idle 29/ Load 51
Just breaking in my setup, still taking it slow. I'll post my results as they improve.

1st time overclocking

Since I had never overclocked before, I was quite surprised at how easy it was. Maybe I'm spoiled with this new Asus board.

2.4c overclocked to 3.36 GHz
280Mhz FSB
mem 2336, 2:3 ratio, 2x512MB Corsair XMS 3700
1.55 CPU volts
2.65 mem volts

Koolance water-cooling case,
3dlabs Wildcat VP970 AGP 4x


Here some of my other settings I tried first. I've marked them with a stability ranging from A to F.

A 220MHz 2.5 4 4 8 ??? 3,700MB/s
C 260MHz 2336 4:5 5,200 MB/s 3.12 GHz
F 240MHz 2336 1:1
A 250MHz 2336 4:5 5,120 MB/s 3.0Ghz
B 285MHz 2336 2:3 5,200 MB/s 3.42 Ghz
F 300MHz 2335 2:3
D 295MHz 2336 2:3
A 280Mhz 2336 2:3 5,073 MB/s 3.36 Ghz

A=runs Prime 95 for hours
B
C=boots into Windows, random/harmless Window error, won't run Prime 95
D
F=can't even get to BIOS, requires CMOS reset


You know, is the middle A better then the last A? Its memory bandwidth is a little higher, but has a lower clock speed. Does it make much of a difference?

2.8C
28/29
2 2 3 5 8
14x246=3444
VDDR=2.85
Vcore=1.675
Highest bootable and tests=262x14 but not prime stable.Cannot run 3DMark at this fsb.

CPU 3.0C
Memory Kingston 3500 HyperX 2-2-2-6
OC (15x238)
ilde 1.70
load 1.60
memory ratio 5:4
WaterChill cooling
temps idle 32º/ full 42º

Can boot at 3.8ghz with 1.75v but its clearly not stable.

btw its about 26c in this room cus the freaking sun is on my damn window allday :|

CPU 2.4c
Memory 2X 256MB Corsair XMS PC3500 2 2 2 5
overclock: 3.540 295x12
5:4 memory ratio DDR472
Water cooled
vcore: 1.675v
30c idle 40c load
vdim voltage 3.1 vmodded