- Joined
- Apr 6, 2002
- Location
- Orlando, FL
Anyone know where I can set the RAM dividers for this board? its an i865PE board
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
MSI Neo2-LS
- Thread starter Drozdov
- Start date
In the bios you under "Frequency/Voltage Control" you will find "DRAM Frequency". When you select DRAM Frequency a menu will pop-up with different frequencies (eg. AUTO, 200Mhz, 266Mhz, 333Mhz, 400Mhz, etc.). Keep in mind the "DDR Clock(Mhz) reading will not change until the after you save settings and reboot.
Also keep in mind, these are the result of dividers. If you change the fsb it will affect the DRAM Clock. I have my DRAM Frequency set to 266, but when I OC my fsb to 166 (See Rig 1 below) my memory runs at 333.
Hope this helps,
Ride
Also keep in mind, these are the result of dividers. If you change the fsb it will affect the DRAM Clock. I have my DRAM Frequency set to 266, but when I OC my fsb to 166 (See Rig 1 below) my memory runs at 333.
Hope this helps,
Ride
