- Joined
- May 26, 2003
- Location
- Somewhere I belong
Hi guys, recentley I brought down the above motherboard and it's revision is 1.2 and bios version is 11. I'm having a xp2000+ processor and having problems to corretley identifyng it inthe bios. Whenever it boot up it shows as 1250 MHz! i then changed the dip swtich to change the fsb, actually in that switch you can on or off if on it'll run 200fsb and off means 266,333.. so when i off it it wo't work and if i on it it'll do the fsb ajusmetn it 100MHz so it will multiply by 100*12.5. So i changed it through clock ratio dip switch to 17 and getting now shwoninthe bios xp1700+ and actual speed is 1738 according to wpcuid. So how can i set my board to correctley detect my xp 2000+ na daslo fsb to 266MHz? I'm hoping o update my bios casue already f13 is avaible inthe internet.
Hope someone can give me a good answer to this, i replaced my msi KT4V ultra because my cpu getting hot in that pcb too mcuh but now i'm finding anoter prob in this gigabyte. Pls help!
Hope someone can give me a good answer to this, i replaced my msi KT4V ultra because my cpu getting hot in that pcb too mcuh but now i'm finding anoter prob in this gigabyte. Pls help!