I'm running 2250 on my 8RGA+, 205fsb x 11. I'm wondering if there is something wrong with my board, my PSU, or if these are normal readings for Voltage. I'm using a pretty cheap Powmax 400watt power supply.
It seems like +5v and +12v are stable.. VDD is pretty good.
The things that concern me the most are:
It seems like vdd(set at 1.8) varies between 1.776 and 1.792..
Vcore (set at 1.7) varies between 1.632 and 1.664..Staying more at the 1.632 range...
Anyway...I noticed in the UDSM application that the voltages on the motherboard mostly look good, except a few of them...
Vbat reads almost constantly at 3.024, should this be 3.3v?
5VSB reads almost constantly at 4.848. Is this within spec?
-5v varies between -5.6 and -5.9....
Anyway..Here is something from the log:
Vdd:1792, VCore:1664, Vdimm:2560, +5V:5053, +12V:12038, Vagp:1504, -5V:5702, Vbat:3024, 5VSB:4848
Also..when running Motherboard monitor, there is a -12v that reads -7v.
Are these readings normal for this motherboard? If not, do you think it is the power supply?
I have an Antec 350w power supply that I could try, but I'm not sure if this power supply would be better or worse then the Powmax 400w. I know Antec is a better brand, but the specs on the Powmax are better.
Should I try the Antec..or do I really need a more powerful good brand power supply.
Any help would be greatly appreciated.
It seems like +5v and +12v are stable.. VDD is pretty good.
The things that concern me the most are:
It seems like vdd(set at 1.8) varies between 1.776 and 1.792..
Vcore (set at 1.7) varies between 1.632 and 1.664..Staying more at the 1.632 range...
Anyway...I noticed in the UDSM application that the voltages on the motherboard mostly look good, except a few of them...
Vbat reads almost constantly at 3.024, should this be 3.3v?
5VSB reads almost constantly at 4.848. Is this within spec?
-5v varies between -5.6 and -5.9....
Anyway..Here is something from the log:
Vdd:1792, VCore:1664, Vdimm:2560, +5V:5053, +12V:12038, Vagp:1504, -5V:5702, Vbat:3024, 5VSB:4848
Also..when running Motherboard monitor, there is a -12v that reads -7v.
Are these readings normal for this motherboard? If not, do you think it is the power supply?
I have an Antec 350w power supply that I could try, but I'm not sure if this power supply would be better or worse then the Powmax 400w. I know Antec is a better brand, but the specs on the Powmax are better.
Should I try the Antec..or do I really need a more powerful good brand power supply.
Any help would be greatly appreciated.